ADG712BRZ

ANALOG DEVICES  ADG712BRZ  模拟开关, 四通道, SPST, 4 放大器, 4 ohm, 1.8V 至 5.5V, SOIC, 16 引脚

单电源 1.65V 至 5.5V 开关和多路复用器，Analog Devices

低接通电阻

低失真

高速切换

低泄漏

低功率

### 开关和多路复用器，Analog Devices

得捷:
IC SWITCH QUAD SPST 16SOIC

立创商城:
ADG712BRZ

欧时:
单电源 1.65V 至 5.5V 开关和多路复用器，Analog Devices低接通电阻 低失真 高速切换 低泄漏 低功率### 开关和多路复用器，Analog Devices

艾睿:
Analog Switch Quad SPST 16-Pin SOIC N Tube

Jameco:
Analog Switch Quad Single Pole Single Throw 5.5 Volt 16-Pin SOIC N

安富利:
The ADG711, ADG712, and ADG713 are monolithic CMOS devices containing four independently selectable switches. These switches are designed on an advanced submicron process that provides low power dissipation yet gives high switching speed, low on resistance, low leakage currents, and high bandwidth.They are designed to operate from a single 1.8 V to 5.5 V supply, making them ideal for use in battery-powered instruments and with the new generation of DACs and ADCs from Analog Devices, Inc. Fast switching times and high bandwidth make the parts suitable for switching USB 1.1 data signals and video signals.The ADG711, ADG712, and ADG713 contain four independent single-pole/single-throw SPST switches. The ADG711 and ADG712 differ only in that the digital control logic is inverted. The ADG711 switches are turned on with a logic low on the appropriate control input, while a logic high is required to turn on the switches of the ADG712. The ADG713 contains two switches whose digital control logic is similar to the ADG711, while the logic is inverted on the other two switches.Each switch conducts equally well in both directions when On. The ADG713 exhibits break-before-make switching action.

Chip1Stop:
Analog Switch Quad SPST 16-Pin SOIC N Tube

TME:
IC: analog switch; SPST; Channels:4; SO16; 1.8÷5.5VDC

Verical:
Analog Switch Quad SPST 16-Pin SOIC N Tube

Newark:
# ANALOG DEVICES  ADG712BRZ  Analog Switch, Quad Channel, SPST, 4 Channels, 4 ohm, 1.8V to 5.5V, SOIC, 16 Pins

罗切斯特:
SPST, 4 Func, 1 Channel, CMOS, PDSO16

Win Source:
IC SWITCH QUAD SPST 16SOIC