ADG5412FBRUZ-RL7

Analog Switch ICs +/-55V Fault Protect +/-20V +/-15V +12V

Product Details

The ADG5412F and ADG5413F contain four independently controlled single-pole/single-throw SPST switches. The ADG5412F has four switches that turn on with Logic 1 inputs. The ADG5413F has two switches with that turn on and two switches that turn off with Logic 1 inputs. Each switch conducts equally well in both directions when on, and each switch has an input signal range that extends to the supplies. The digital inputs are compatible with 3 V logic inputs over the full operating supply range.

When no power supplies are present, the switch remains in the off condition, and the switch inputs are high impedance. Under normal operating conditions, if the analog input signal levels on any Sx pin exceed VDD or VSS by a threshold voltage, VT, then the switch turns off. Input signal levels up to +55 V or −55 V relative to ground are blocked, in both the powered and unpowered condition.

The low on resistance of these switches, combined with on-resistance flatness over a significant portion of the signal range make them an ideal solution for data acquisition and gain switching applications where excellent linearity and low distortion are critical.

**Product Highlights**

1. Source pins are protected against voltages greater than the supply rails, up to −55 V and +55 V.

2. Source pins are protected against voltages between −55 V and +55 V, in an unpowered state.

3. Overvoltage detection with digital output indicates operating state of switches.

4. Trench isolation guards against latch-up.

5. Optimized for low on resistance and on-resistance flatness.

6. The ADG5412F/ADG5413F can be operated from a dual supply of ±5 V up to ±22 V or a single power supply of 8 V up to 44 V.

**Applications**

.

Analog input/output modules

.

Process control/distributed control systems

.

Data acquisition

.

Instrumentation

.

Avionics

.

Automatic test equipment

.

Communication systems

.

Relay replacement

### Features and Benefits

.

Overvoltage protection up to −55 V and +55 V

.

Power-off protection up to −55 V and +55 V

.

Overvoltage detection on source pins

.

Low on resistance: 10 Ω

On-resistance flatness of 0.5 Ω

.

5.5 kV human body model HBM ESD rating

.

Latch-up immune under any circumstance

.

Known state without digitals present

.

VSS to VDD analog signal range

±5 V to ±22 V dual supply operation

8 V to 44 V single-supply operation

Fully specified at ±15 V, ±20 V, +12 V, and +36 V

ADG5412F-EP supports defense and aerospace applications AQEC standard

.

Download ADG5412F-EP Data Sheet pdf

.

Military temperature range −55°C to +125°C

.

Controlled manufacturing baseline

.

One assembly/test site

.

One fabrication site

.

Enhanced product change notification

.

Qualification data available on request

.

V62/16608 DSCC Drawing Number