ADG609BR

ADG609BR图片1
ADG609BR图片2
ADG609BR图片3
ADG609BR图片4
ADG609BR图片5
ADG609BR图片6
ADG609BR图片7
ADG609BR概述

3 V / 5 V , 4/8通道高性能模拟多路复用器 3 V/5 V, 4/8 Channel High Performance Analog Multiplexers

2 Circuit IC Switch 4:1 30Ohm 16-SOIC


得捷:
IC MULTIPLEXER DUAL 4X1 16SOIC


艾睿:
Analog Multiplexer Dual 4:1 16-Pin SOIC N Tube


安富利:
The ADG609 is a monolithic CMOS analog multiplexers comprising eight single channels and four differential channels respectively, fully specified for ±5 V, +5 V and +3 V power supplies. The ADG608 switches one of eight inputs to a common output as determined by the 3-bit binary address lines A0, A1 and A2. The ADG609 switches one of four differential inputs to a common differential output as determined by the 2-bit binary address lines A0 and A1. An EN input on both devices is used to enable or disable the device. When disabled, all channels are switched OFF. All the address and enable inputs are TTL compatible over the full specified operating temperature range, making the parts suitable for bus-controlled systems such as data acquisition systems, process controls, avionics and ATEs since the TTL compatible address inputs simplify the digital interface design and reduce the board space requirements.The ADG608 is a designed on an enhanced LC2MOS process that provides low power dissipation yet gives high switching speed and low on resistance. Each channel conducts equally well in both directions when ON and has an input signal range which extends to the supplies. In the OFF condition, signal levels up to the supplies are blocked. All channels exhibit break-before-make switching action preventing momentary shorting when switching channels. Inherent in the design is low charge injection for minimum transients when switching the digital inputs.The ability to operate from single +3 V, +5 V or ±5 V bipolar supplies makes the ADG608 and ADG609 perfect for use in battery operated instruments and with the new generation of DACs and ADCs from Analog Devices. The use of 5 V supplies and reduced operating currents gives much lower power dissipation than devices operating from ±15 V supplies.


Chip1Stop:
Analog Multiplexer Dual 4:1 16-Pin SOIC N Tube


Verical:
Analog Multiplexer Dual 4:1 16-Pin SOIC N Tube


罗切斯特:
Differential Multiplexer, 1 Func, 4 Channel, BICMOS, PDSO16


ADG609BR中文资料参数规格
技术参数

输出接口数 2

触点类型 4PST

供电电流 50 nA

电路数 2

通道数 2

耗散功率 0.000002 W

输入数 8

工作温度Max 85 ℃

工作温度Min -40 ℃

封装参数

安装方式 Surface Mount

引脚数 16

封装 SOIC-16

外形尺寸

高度 1.5 mm

封装 SOIC-16

物理参数

工作温度 -40℃ ~ 85℃ TA

其他

产品生命周期 Active

包装方式 Tube

符合标准

RoHS标准 Non-Compliant

含铅标准 Contains Lead

数据手册

ADG609BR引脚图与封装图
ADG609BR引脚图
ADG609BR封装图
ADG609BR封装焊盘图
在线购买ADG609BR
型号: ADG609BR
制造商: ADI 亚德诺
描述:3 V / 5 V , 4/8通道高性能模拟多路复用器 3 V/5 V, 4/8 Channel High Performance Analog Multiplexers
替代型号ADG609BR
型号/品牌 代替类型 替代型号对比

ADG609BR

ADI 亚德诺

当前型号

当前型号

ADG442BRZ

亚德诺

类似代替

ADG609BR和ADG442BRZ的区别

ADG609BRZ

亚德诺

类似代替

ADG609BR和ADG609BRZ的区别

ADG608BRZ

亚德诺

类似代替

ADG609BR和ADG608BRZ的区别

锐单商城 - 一站式电子元器件采购平台