Accelerometer Single 4.75V to 5.25V 8Pin CLCC T/R
Product Details
The ADXL78 is a low power, complete single-axis accelerometer with signal conditioned voltage outputs that are on a single monolithic IC. This product measures acceleration with a full-scale range of ±35 g, ±50 g, or ±70 g minimum. It can also measure both dynamic acceleration vibration and static acceleration gravity.
The ADXL78 is the fourth-generation surface micromachined _i_MEMS® accelerometer from with enhanced performance and lower cost. Designed for use in front and side impact airbag applications, this product also provides a complete cost-effective solution useful for a wide variety of other applications.
The ADXL78 is temperature stable and accurate over the automotive temperature range, with a self-test feature that fully exercises all the mechanical and electrical elements of the sensor with a digital signal applied to a single pin.
The ADXL78 is available in a 5 mm × 5 mm × 2 mm, 8-terminal ceramic LCC package.
**Applications**
- .
- Vibration Control and Monitoring
- .
- Vehicle collision sensing
- .
- Shock Detection
### Features and Benefits
- .
- Complete acceleration measurement system on a single monolithic IC
- .
- Available ±35g, ±50g, or ±70g output full-scale ranges
- .
- Full differential sensor and circuitry for high resistance to EMI/RFI
- .
- Environmentally robust packaging
- .
- Complete mechanical and electrical self-test on digital command
- .
- Output ratiometric to supply
- .
- Sensitive axis in the plane of the chip
- .
- High linearity 0.2% of full-scale
- .
- Frequency response down to dc
- .
- Low noise
- .
- Low power consumption 1.3 mA
- .
- 400 Hz, 2-pole Bessel filter
