宽带调制解调器混合信号前端 Broadband Modem Mixed-Signal Front End
Product Details
The AD9869 is a mixed-signal front-end MxFE® IC for transceiver app requiring Tx path and Rx path functionality with data rates up to 80 MSPS. A lower cost, pin-compatible version of the AD9866, the AD9869 removes the current amplifier IAMP IOUTP functionality and limits the PLL VCO operating range of 80 MHz to 200 MHz.
The part is well suited for half- and full-duplex applications. The digital interface is extremely flexible, allowing simple interfacing to digital back ends that support half- or full-duplex data transfers, often allowing the AD9869 to replace discrete ADC and DAC solutions. Power-saving modes include the ability to reduce power consumption of individual functional blocks or power down unused blocks in half-duplex applications. A serial port interface SPI allows software programming of the various functional blocks. An on-chip PLL clock multiplier and synthesizer provide all the required internal clocks, as well as two external clocks, from a single crystal or clock source.
The Tx signal path consists of a 2×/4× low-pass interpolation filter, a 12-bit TxDAC, and a line driver. The transmit path signal bandwidth can be as high as 34 MHz at an input data rate of 80 MSPS. The TxDAC provides differential current outputs that can be steered directly to an external load or to an internal low distortion current amplifier IAMP capable of delivering 17 dBm peak signal power. Tx power can be digitally controlled over a 19.5 dB range in 0.5 dB steps.
The receive path consists of a programmable amplifier RxPGA, a tunable low-pass filter LPF, and a 12-bit ADC. The low noise RxPGA has a programmable gain range of −12 dB to +48 dB in 1 dB steps. Its input referred noise is less than 3 nV/√Hz for gain settings beyond 36 dB. The receive path LPF cutoff frequency can be set over a 15 MHz to 35 MHz range or it can be simply bypassed. The 12-bit ADC achieves excellent dynamic performance up to an 80 MSPS span. Both the RxPGA and the ADC offer scalable power consumption allowing power/performance optimization.
The AD9869 provides a highly integrated solution for many broadband modems. It is available in a space-saving package, a 16-lead LFCSP, and is specified over the commercial temperature range −40°C to +85°C.
**Applications**
* Broadband wireline networking
### Features and Benefits
2×/4× interpolation filter
200 MSPS DAC update rate
Half- and full-duplex operation
Pin compatible with the AD9866
Various power-down/reduction modes
供电电流 406 mA
通道数 1
耗散功率 1660 mW
分辨率Bits 12.0
模数转换数ADC 1
工作温度Max 85 ℃
工作温度Min -40 ℃
耗散功率Max 1660 mW
数模转换数DAC 1
电源电压 3.3 V
电源电压Max 3.465 V
电源电压Min 3.135 V
安装方式 Surface Mount
引脚数 64
封装 LFCSP-64
高度 0.83 mm
封装 LFCSP-64
工作温度 -40℃ ~ 85℃
产品生命周期 Obsolete
包装方式 Tray
制造应用 宽带电话线网络
RoHS标准 RoHS Compliant
含铅标准 Lead Free
REACH SVHC标准 No SVHC
军工级 No
REACH SVHC版本 2013/06/20
型号/品牌 | 代替类型 | 替代型号对比 |
---|---|---|
AD9869BCPZ ADI 亚德诺 | 当前型号 | 当前型号 |
AD9866BCPZ 亚德诺 | 类似代替 | AD9869BCPZ和AD9866BCPZ的区别 |