ADN2819ACPZ-CML-RL

计时器和支持产品 Multi-Rate 2.7Gbps CDR/ PA Low Power I.C

Product Details

The ADN2819 provides receiver functions of Quantization, Signal Level Detect and Clock and Data Recovery at rates of OC-3, OC-12, Gigabit Ethernet, OC-48 and all FEC rates. All SONET jitter requirements are met, including: Jitter Transfer; Jitter Generation; and Jitter Tolerance. All specifications are quoted for -40ºC to +85ºC ambient temperature unless otherwise noted.

The proprietary delay and phase-locked loop design of the ADN2819 provides unprecedented jitter performance for robust high-speed networking designs.

The device is intended for WDM system applications and can be used with either an external reference clock or an on-chip crystal oscillator. Both native rates and 15/14 rate digital wrappers rates are supported by the ADN2819, without any change of reference clock required. This device together with a PIN diode and a TIA preamplifier can implement a highly integrated, low cost, low power fiber optic receiver. The receiver front end Signal Detect circuit indicates when the input signal level has fallen below a user adjustable threshold.

### Features and Benefits

.

Multirate 155/166 Mbps, 622/666 Mbps, 1.25/1.34 Gbps, 2.49/2.67 Gbps

.

Integrated Limiting Amplifier with Adjustable Slice

.

Quantizer Sensitivity: 6 mV

.

Adjustable Slice Level: ±100 mV

.

Exceeds all SONET/SDH Requirements for Jitter Transfer, Generation, and Tolerance

.

Internal MUX to Bypass CDR

.

Low power: 540 mW

.

One supply: 3.0V - 3.6V

.

Single Reference Clock Frequency for All Rates

.

Loss-of-Lock Indicator

.

Small Footprint: 48-lead LFCSP Package 7 mm x 7 mm overall