ADN2811ACP-CML-RL

OC- 48 / OC- 48 FEC时钟和数据恢复IC，集成限幅放大器 OC-48/OC-48 FEC Clock and Data Recovery IC with Integrated Limiting Amp

Product Details

The ADN2811 provides the receiver functions of quantization, signal level detect, and clock and data recovery at OC-48 and OC-48 FEC rates. All SONET jitter requirements are met, including jitter transfer, jitter generation, and jitter tolerance. All specifications are quoted for −40°C to +85°C ambient temperature, unless otherwise noted.

The device is intended for WDM system applications and can be used with either an external reference clock or an on-chip oscillator with external crystal. Both the 2.48 Gbps and 2.66 Gbps digital wrapper rates are supported by the ADN2811, without any change of reference clock.

This device, together with a PIN diode and a TIA preamplifier, can implement a highly integrated, low cost, low power, fiber optic receiver.

The receiver front end signal detect circuit indicates when the input signal level has fallen below a user-adjustable threshold. The signal detect circuit has hysteresis to prevent chatter at the output.

The ADN2811 is available in a compact, 7 mm × 7 mm, 48-lead chip scale package.

Applications

.

SONET OC-48, SDH STM-16, and 15/14 FEC

.

WDM transponders

.

Regenerators/repeaters

.

Test equipment

.

Backplane applications

### Features and Benefits

.

Meets SONET requirements for jitter transfer/generation/tolerance

.

Quantizer sensitivity: 4 mV typical

.

Adjustable slice level: ±100 mV

.

1.9 GHz minimum bandwidth

.

Patented clock recovery architecture

.

Loss of signal detect range: 3 mV to 15 mV

.

Single reference clock frequency for both native SONET and 15/14 7% wrapper rate

.

Choice of 19.44 MHz, 38.88 MHz, 77.76 MHz, or 155.52 MHz REFCLK

.

LVPECL/LVDS/LVCMOS/LVTTL compatible inputs LVPECL/LVDS only at 155.52 MHz

.

19.44 MHz on-chip oscillator to be used with external crystal

.

Loss of lock indicator

.

Loopback mode for high speed test data

.

Output squelch and bypass features

.

Single-supply operation: 3.3 V

.

Low power: 540 mW typical

.

7 mm × 7 mm, 48-lead LFCSP