Optocoupler Logic-Out Totem-Pole DC-IN 1CH 8Pin PDIP Tube
Description
The ACPL-4800 fast speed optocoupler contains a GaAsP LED and photo detector with built-in Schmitt trigger to provide logic-compatible waveforms, eliminating the need for additional wave shaping. The totem pole output eliminates the need for a pull up resistor and allows for direct drive Intelligent Power Module or gate drive.
Features
• Performance Specified for Fast IPM Applications over Industrial Temperature Range: -40°C to 100°C
• Wide Operating VCCRange: 4.5 to 20 Volts
• Typical Propagation Delays 150 ns
• Maximum Pulse Width Distortion
PWD = 250 ns
• Propagation Delay Difference
Min. –100 ns, Max. 250 ns
• 30 kV/µs Minimum Common Mode Transient Immunity at VCM= 1000 V
• Hysteresis
• Totem Pole Output No Pull-up Resistor Required
• Safety Approval:
UL 1577, 3750 Vrms/ 1 minute
CSA File CA88324, Notice #5
IEC/EN/DIN EN 60747-5-2, VIORM= 630 Vpeak
Applications
• IPM Interface Isolation
• Isolated IGBT/MOSFET Gate Drive
• AC and Brushless DC Servo Motor Drives
• Low Power Inverters
• General Digital Isolation
上升/下降时间 16ns, 20ns
输入电压DC 1.50 V
通道数 1
正向电压 1.5 V
耗散功率 210 mW
上升时间 16 ns
隔离电压 3750 Vrms
正向电流 10 mA
正向电流Max 10 mA
下降时间 20 ns
工作温度Max 100 ℃
工作温度Min 40 ℃
电源电压 4.5V ~ 20V
安装方式 Through Hole
封装 DIP-8
长度 9.65 mm
宽度 6.35 mm
高度 3.56 mm
封装 DIP-8
工作温度 -40℃ ~ 100℃
产品生命周期 Unknown
包装方式 Tube
RoHS标准 RoHS Compliant
含铅标准 Lead Free