AVR-P28N-8MHZ

OLIMEX  AVR-P28N-8MHZ  原型开发板, STK200 兼容, 28引脚

The is a is prototype board for 28pin AVR microcontrollers with STKxxx compatible 10pin ICSP connector. The AVR microcontrollers are low power CMOS 8bit controller based on the RISC architecture. The AVR core combines a rich instruction set with general purpose working registers. All the registers are directly connected to the arithmetic logic unit ALU, allowing two independent registers to be accessed in one single instruction executed in one clock cycle. The resulting architecture is more code efficient while achieving throughputs up to ten times faster than conventional CISC microcontrollers.

.

STK200 compatible ICSP 10pin connector for in circuit programming with AVR-PG1B or AVR-PG2B

.

RS 232 Tx, Rx interface with MAX232 IC on socket

.

8MHz crystal on socket user can replace with any value

.

Reset IC ZM33064

.

General purpose push button

.

Selectable 3.3V/5V power supply voltage regulator

.

Extension pin headers for each uC pin

.

Four mounting holes 3.3mm 0.13inches

The AVR-P28 board is shipped in protective anti static packaging. The board must not be subject to high electrostatic potentials.