ADM1491EBRZ-REEL7

16 Mbps的ESD保护，全双工RS - 485收发器 16 Mbps, ESD Protected, Full-Duplex RS-485 Transceivers

Product Details

The ADM1490E/ADM1491E are RS-485 transceivers with ±8 kV ESD protection and is suitable for high speed, full-duplex communication on multipoint transmission lines. In particular, the ADM1491E is designed for use in motor control applications requiring communications at data rates up to 16 Mbps.

The ADM1491E is designed for balanced transmission lines and complies with TIA/EIA-485-A-98. The device has a 12 kΩ receiver input impedance for unit load RS-485 operation allowing up to 32 nodes on the bus.

The differential transmitter outputs and receiver inputs feature electrostatic discharge circuitry that provides protection to ±8 kV using the human body model HBM.

The ADM1491E operates from a single 5 V power supply. Excessive power dissipation caused by bus contention or output shorting is prevented by short-circuit protection and thermal circuitry.

Short-circuit protection circuits limit the maximum output current to ±250 mA during fault conditions. A thermal shutdown circuit senses if the die temperature rises above 150°C and forces the driver outputs into a high impedance state under this condition.

The receiver of the ADM1491E contains a fail-safe feature that results in a logic high output state if the inputs are unconnected floating.

The ADM1491E features extremely fast and closely matched switching times. Minimal driver propagation delays permit transmission at data rates up to 16 Mbps while low skew minimizes EMI interference.

The ADM1491E is fully specified over the commercial and industrial temperature ranges and is available in two packages: a narrow-body 14-lead SOIC and a 10-lead MSOP.

**APPLICATIONS**

.

RS-485/RS-422 interfaces

.

Industrial field networks

.

High data rate motor controlv

.

Multipoint data transmission systems

.

Single-ended to differential signal conversion

### Features and Benefits

.

RS-485/RS-422 full duplex transceiver, for high speed motor control applications

.

16 Mbps data rate

.

±8 kV ESD protection on RS-485 input/output pins

.

Complies with ANSI/TIA/EIA-485-A-1998

.

Open circuit fail-safe

.

Suitable for 5 V power supply applications

.

32 nodes on the bus 1 unit load

.

Thermal shutdown protection

.

Operating temperature range: −40°C to +85°C

.

Packages

Narrow-body 14-lead SOIC

10-lead MSOP