2.7 V至5.5 V ， 140 MUA ，轨到轨输出8位DAC，采用SOT- 23 2.7 V to 5.5 V, 140 muA, Rail-to-Rail Output 8-Bit DAC in a SOT-23
Product Details
The AD5300 is a single, 8-bit buffered voltage-out DAC that operates from a single 2.7 V to 5.5 V supply consuming 115 µA at 3 V. Its on-chip precision output amplifier allows rail-to-rail output swing to be achieved.The AD5300 utilizes a versatile three-wire serial interface that operates at clock rates up to 30 MHz and is compatible with standard SPI™,QSPI™,MICROWIRE™ and DSP interface standards.
**Product Highlights**
* Available in 6-lead SOT-23 and 8-lead MicroSOIC packages.
* Low power, single supply operation from 2.7 V to 5.5 V supply
* Consumes 0.35 mW at 3 V and 0.7 mW at 5 V
* Rail-to-Rail output with a slew rate of 1 V/µs.
* Reference derived from the power supply.
* High speed serial interface with clock speeds up to 30 MHz.
* Pin and Software Compatible with the AD5300 8-Bit and the AD5320 12-bit
The reference for AD5300 is derived from the power supply inputs and thus gives the widest dynamic output range.The part incorporates a power-on-reset circuit that ensures that the DAC output powers up to zero volts and remains there until a valid write takes place to the device.The part contains a power-down feature that reduces the current consumption of the device to 200 nA at 5 V and provides software selectable output loads while in power-down mode.The part is put into power-down mode over the serial interface.
The low power consumption of this part in normal operation makes it ideally suited to portable battery operated equipment. The power consumption is 0.7 mW at 5 V reducing to 1 µW in power-down mode.
The AD5300 is one of a family of pin-compatible DACs. The AD5310 is the 10-bit version and the AD5320 is the 12-bit version.The AD5300/AD5310/AD5320 are available in 6-lead SOT-23 packages and 8-lead µSOIC packages.
Related Products
---
**AD5601**** ** | 2.7 V to 5.5 V, <100 µA, 8-Bit nanoDAC™ D/A Converter, SPI Interface, SC70 Package
### Features and Benefits
- .
- Micropower: 140 µA @ 5 V, 115 µA @ 3 V
- .
- Power-Down to 200 nA @ 5 V, 50 nA @ 3 V
- .
- Guaranteed Monotonic by Design
- .
- Power-On-Reset to Zero Volts
- .
- Low Power, SPI™, QSPI™, MICROWIRE™ and DSP Compatible 3-Wire Serial Interface
- .
- Three Power-Down Functions
- .
- Output Buffer Amplifier with Rail-to-Rail Operation
- .
- SYNCactive low Interrupt Facility
- .
- Temperature Range: -40°C to 105°C
