AD823ARZ-RL

双通道， 16 MHz的轨到轨FET输入放大器 Dual, 16 MHz, Rail-to-Rail FET Input Amplifier

Product Details

The AD823 is a dual precision, 16 MHz, JFET input op amp that can operate from a single supply of 3.0 V to 36 V or from dual supplies of ±1.5 V to ±18 V. It has true single-supply capability with an input voltage range extending below ground in single-supply mode. Output voltage swing extends to within 50 mV of each rail for I

OUT ≤ 100 μA, providing outstanding output dynamic range.

An offset voltage of 800 μV maximum, an offset voltage drift of 2 μV/°C, input bias currents below 25 pA, and low input voltage noise provide dc precision with source impedances up to a Gigaohm. It provides 16 MHz, −3 dB bandwidth, −108 dB THD @ 20 kHz, and a 22 V/μs slew rate with a low supply current of 2.6 mA per amplifier. The AD823 drives up to 500 pF of direct capacitive load as a follower and provides an output current of 15 mA, 0.5 V from the supply rails. This allows the amplifier to handle a wide range of load conditions.

This combination of ac and dc performance, plus the outstanding load drive capability, results in an exceptionally versatile amplifier for applications such as A/D drivers, high speed active filters, and other low voltage, high dynamic range systems.

The AD823 is available over the industrial temperature range of −40°C to +85°C and is offered in both 8-lead PDIP and 8-lead SOIC packages.

**Applications**

.

Battery-powered precision instrumentation

.

Photodiode preamps

.

Active filters

.

12-bit to 16-bit data acquisition systems

.

Medical instrumentation

### Features and Benefits

.

Single-supply operation

.

Output swings rail-to-rail

.

Input voltage range extends below ground

.

Single-supply capability from 3 V to 36 V

.

High load drive

.

Capacitive load drive of 500 pF, G = +1

.

Output current of 15 mA, 0.5 V from supplies

.

Excellent ac performance on 2.6 mA/amplifier

.

−3 dB bandwidth of 16 MHz, G = +1

.

350 ns settling time to 0.01% 2 V step

.

Slew rate of 22 V/μs

.

Good dc performance

.

800 μV maximum input offset voltage

.

2 μV/°C offset voltage drift

.

25 pA maximum input bias current

.

Low distortion: −108 dBc worst harmonic @ 20 kHz

.

Low noise: 16 nV/√Hz @ 10 kHz

.

No phase inversion with inputs to the supply rails