单电源,轨到轨,低功耗, FET输入运算放大器 Single-Supply, Rail-to-Rail, Low Power FET-Input Op Amp
Product Details
The AD820 is a precision, low power FET input op amp that can operate from a single supply of 5 V to 36 V, or dual supplies of ±2.5 V to ±18 V. It has true single-supply capability, with an input voltage range extending below the negative rail, allowing the AD820 to accommodate input signals below ground in the single-supply mode. Output voltage swing extends to within 10 mV of each rail, providing the maximum output dynamic range.
Offset voltage of 800 μV maximum, offset voltage drift of 2 μV/°C, typical input bias currents below 25 pA, and low input voltage noise provide dc precision with source impedances up to 1 GΩ. 1.8 MHz unity gain bandwidth, −93 dB THD at 10 kHz, and 3 V/μs slew rate are provided for a low supply current of 800 μA. The AD820 drives up to 350 pF of direct capacitive load and provides a minimum output current of 15 mA. This allows the amplifier to handle a wide range of load conditions. This combination of ac and dc performance, plus the outstanding load drive capability, results in an exceptionally versatile amplifier for the single-supply user.
The AD820 is available in two performance grades. The A and B grades are rated over the industrial temperature range of −40°C to +85°C. The AD820 is offered in three 8-lead package options: plastic DIP PDIP, surface mount SOIC and MSOP.
**Applications**
* Battery-powered precision instrumentation
* Photodiode preamps
* Active filters
* 12-bit to 14-bit data acquisition systems
* Medical instrumentation
* Low power references and regulators
Data Sheet, Rev. F, 11/08
### Features and Benefits
Output swings rail-to-rail
Input voltage range extends below ground
Single-supply capability from 5 V to 36 V
Dual-supply capability from ±2.5 V to ±18 V
Capacitive load drive up to 350 pF
Minimum output current of 15 mA
800 μA maximum quiescent current
Unity-gain bandwidth: 1.8 MHz
Slew rate of 3 V/μs
800 μV maximum input offset voltage
2 μV/°C typical offset voltage drift
25 pA maximum input bias current
供电电流 700 µA
电路数 1
通道数 1
耗散功率 1000 mW
共模抑制比 80.0 dB
输入电容 2.80 pF
转换速率 3.00 V/μs
增益频宽积 1.8 MHz
输入阻抗 10.0 TΩ
输入补偿电压 300 µV
输入偏置电流 2 pA
工作温度Max 85 ℃
工作温度Min -40 ℃
3dB带宽 1.9 MHz
耗散功率Max 1000 mW
共模抑制比Min 72 dB
安装方式 Surface Mount
引脚数 8
封装 SOIC-8
封装 SOIC-8
工作温度 -40℃ ~ 85℃
产品生命周期 Active
包装方式 Tape & Reel TR
制造应用 Healthcare, Clinical Monitoring, Sport Watch, Health, Wellness and Fitness, Wearable Health Monitoring, NiBP based on ECG and PPG, ECG Patient Monitoring
RoHS标准 Non-Compliant
含铅标准 Contains Lead
军工级 No
型号/品牌 | 代替类型 | 替代型号对比 |
---|---|---|
AD820BR-REEL ADI 亚德诺 | 当前型号 | 当前型号 |
AD820BRZ 亚德诺 | 类似代替 | AD820BR-REEL和AD820BRZ的区别 |
OP177FSZ 亚德诺 | 类似代替 | AD820BR-REEL和OP177FSZ的区别 |
AD820AR 亚德诺 | 类似代替 | AD820BR-REEL和AD820AR的区别 |