AD625SE/883B

AD625SE/883B图片1
AD625SE/883B图片2
AD625SE/883B图片3
AD625SE/883B图片4
AD625SE/883B图片5
AD625SE/883B概述

SP Amp INSTR Amp Single 18V 20Pin CLLCC Tube

Product Details

The AD625 is a precision instrumentation amplifier specifically designed to fulfill two major areas of application: 1 Circuits requiring nonstandard gains i.e., gains not easily achievable with devices such as the AD524 and AD624. 2 Circuits requiring a low cost, precision software programmable gain amplifier.

For low noise, high CMRR, and low drift the AD625JN is the most cost effective instrumentation amplifier solution available. An additional three resistors allow the user to set any gain from 1 to 10,000. The error contribution of the AD625JN is less than 0.05% gain error and under 5 ppm/°C gain TC; performance limitations are primarily determined by the external resistors. Common-mode rejection is independent of the feedback resistor matching.

A software programmable gain amplifier SPGA can be configured with the addition of a CMOS multiplexer or other switch network, and a suitable resistor network. Because the ON resistance of the switches is removed from the signal path, an AD625 based SPGA will deliver 12-bit precision, and can be programmed for any set of gains between 1 and 10,000, with completely user selected gain steps.

For the highest precision the AD625C offers an input offset voltage drift of less than 0.25 µV/°C, output offset drift below 15 µV/°C, and a maximum nonlinearity of 0.001% at G = 1. All grades exhibit excellent ac performance; a 25 MHz gain bandwidth product, 5 V/µs slew rate and 15 µs settling time.

The AD625 is available in three accuracy grades A, B, C for industrial -40°C to +85°C temperature range, two grades J, K for commercial 0°C to +70°C temperature range, and one S grade rated over the extended -55°C to +125°C temperature range.

### Features and Benefits

.
User Programmed Gains of 1 to 10,000
.
Low Gain Error: 0.02% Max
.
Low Gain TC: 5 ppm/°C Max
.
Low Nonlinearity: 0.001% Max
.
Low Offset Voltage: 25 µV
.
Low Noise 4 nV/√Hz at 1 kHz RTI
.
MIL-Standard Parts Available
.
Gain Bandwidth Product: 25 MHz
.
16-Lead Ceramic or Plastic DIP

Package, 20-Terminal LCC Package

.
Standard Military Drawing Available
.
Low Cost
AD625SE/883B中文资料参数规格
技术参数

供电电流 5.00 mA

通道数 1

耗散功率 450 mW

共模抑制比 70 dB

增益频宽积 25 MHz

输入补偿电压 0.05 mV

输入偏置电流 50 nA

工作温度Max 125 ℃

工作温度Min -55 ℃

耗散功率Max 450 mW

共模抑制比Min 70 dB

电源电压Max 30V ~ 50V

封装参数

安装方式 Surface Mount

引脚数 20

封装 LCC-20

外形尺寸

长度 9.09 mm

宽度 9.09 mm

高度 2.54 mm

封装 LCC-20

物理参数

工作温度 -55℃ ~ 125℃

其他

产品生命周期 Active

包装方式 Tube

符合标准

RoHS标准 Non-Compliant

含铅标准 Contains Lead

数据手册

AD625SE/883B引脚图与封装图
AD625SE/883B电路图
在线购买AD625SE/883B
型号: AD625SE/883B
制造商: ADI 亚德诺
描述:SP Amp INSTR Amp Single 18V 20Pin CLLCC Tube
替代型号AD625SE/883B
型号/品牌 代替类型 替代型号对比

AD625SE/883B

ADI 亚德诺

当前型号

当前型号

5962-87719012A

亚德诺

完全替代

AD625SE/883B和5962-87719012A的区别

AD625AE

亚德诺

功能相似

AD625SE/883B和AD625AE的区别

锐单商城 - 一站式电子元器件采购平台