降压型 Vin=2.15V~6.5V Vout=800mV~5V 500mA 50mA
Product Details
The ADP5302 is a high efficiency, ultralow quiescent current step-down regulator that draws only 240 nA quiescent current to regulate the output at no load.
The ADP5302 runs from an input voltage of 2.15 V to 6.50 V, allowing the use of multiple alkaline or NiMH cells, Li-Ion cells, or other power sources. The output voltage is selectable from 0.8 V to 5.0 V by an external VID resistor and a factory fuse. The total solution requires only four tiny external components.
The ADP5302 can operate between hysteresis mode and PWM mode via the SYNC/MODE pin. In hysteresis mode, the regulator achieves excellent efficiency at less than 1 mW and provides up to 50 mA of output current. In PWM mode, the regulator produces a lower output ripple and supplies up to 500 mA of output current. The flexible configuration capability during operation of the device enables very efficient power management to meet both long battery life and low system noise requirements.
The ADP5302 integrates an ultralow power comparator with a factory programmable voltage reference to monitor the input battery voltage. The regulator runs at a 2 MHz switching frequency in PWM mode, and the SYNC/MODE pin can be synchronized to an external clock from 1.5 MHz to 2.5 MHz.
The ADP5302 includes an extra STOP pin that can temporarily disable the regulator switching; in this way, a quiet system environment can be achieved to benefit the noise sensitive circuitry, which includes data conversion, RF data transmission, and analog sensors.
Other key features in the ADP5302 include separate enabling, QOD, and safety features, such as overcurrent protection OCP, thermal shutdown TSD, and input undervoltage lockout UVLO.
The ADP5302 is available in a 10-lead, 3 mm × 3 mm LFCSP package rated for the -40°C to +125°C junction temperature range.
Applications
### Features and Benefits
输出接口数 1
输出电压 0.8V ~ 5V
输出电流 50mA, 500mA
开关频率 2 MHz
输入电压Max 6.5 V
输入电压Min 2.15 V
输出电压Max 5 V
输出电压Min 0.8 V
输出电流Max 0.5 A
工作温度Max 125 ℃
工作温度Min -40 ℃
输入电压 6.5 V
安装方式 Surface Mount
引脚数 10
封装 LFCSP-10
封装 LFCSP-10
工作温度 -40℃ ~ 125℃ TJ
产品生命周期 Active
包装方式 Tape & Reel TR
制造应用 Clinical Monitoring, Body Composition Measurement, Wearable Health Monitoring, Health, Wellness and Fitness, Sport Watch, Healthcare, Respiration Measurement, Medical Isolation and Patient Safety, Motion Sensing/Fall Detection, SpO2, EEG , Clinical, NiBP based on ECG and PPG, Portable Blood Analyzer
RoHS标准 RoHS Compliant
含铅标准 Contains Lead
ECCN代码 EAR99