全功能评估板 Full-featured evaluation module
The is an evaluation module for AMC1204, a one bit modulator with an output buffer separated from the input interface circuitry by a silicon dioxide SiO2 isolation barrier. The isolation barrier provides galvanic isolation of up to 4000VPEAK. When used in combination with the AMC1210 or other digital filter, the AMC1204 can be used to achieve 16bit analog to digital A/D conversion with no missing codes. For use in high resolution measurement applications, an effective accuracy of 14bits can be obtained with a digital filter bandwidth of 20kHz at a modulator rate of 10MHz. The evaluation module is a small form factor board containing all the necessary components to evaluate the AMC1204 device.
- .
- Fully featured evaluation module for the AMC1204 single channel, delta sigma modulator
- .
- Nine pin D-sub connector for interfacing to the AMC1210 digital filter evaluation module
- .
- AMC1204EVM board consists of simple R/C filter circuits for analog input
- .
- Screw terminals for easy access to analog inputs
- .
- ±250mV input voltage range optimized for shunt resistors
Carefully review the AMC1204 data sheet for the limitations of the analog input range, and ensure that the appropriate analog/digital voltages are applied before connecting to analog input to the EVM.