AD8240YRMZ

AD8240YRMZ图片1
AD8240YRMZ图片2
AD8240YRMZ图片3
AD8240YRMZ图片4
AD8240YRMZ图片5
AD8240YRMZ图片6
AD8240YRMZ图片7
AD8240YRMZ图片8
AD8240YRMZ图片9
AD8240YRMZ图片10
AD8240YRMZ图片11
AD8240YRMZ图片12
AD8240YRMZ图片13
AD8240YRMZ图片14
AD8240YRMZ图片15
AD8240YRMZ图片16
AD8240YRMZ概述

ANALOG DEVICES  AD8240YRMZ  芯片, 发光二极管驱动器, 线性, MSOP-8

Product Details

The AD8240 LED driver/monitor, in combination with an external transistor, supplies a constant 12 V to drive LED lamps. This allows cost-effective LED lamp monitoring and short-circuit protection. The output is regulated at 12 V when the supply voltage is between 12.5 V and 27 V.

A CMOS compatible, level-dependent, digital input can be used for PWM control of the LED brightness. VO is turned on when the PWM input is high and turned off when the input is low. The AD8240 is designed to work with a PWM frequency up to 500 Hz, and a typical PWM range from 5% to 95%.

Open LED detection is accomplished by measuring the change in LED lamp current caused by an open LEDs through the use of an internal high-side current-sense amplifier that amplifies the voltage across an external current shunt. The voltage across the shunt resistor is amplified to a level that can be measured by a microcontroller A/D converter or a comparator. The ability to measure the change in LED lamp current is the key benefit of constant-voltage LED lamp driving.

The output is current-limited by latching off the output voltage when the current reaches a preset level. The current limit is set by selecting the value of the external current shunt that causes the output of the sense amplifier to slightly exceed the 5 V reference level when the current exceeds a maximum level. When the sense amplifier output exceeds 5 V, it trips an internal comparator that causes the driver to latch off the output voltage. The latch is reset during the next PWM cycle. The overcurrent condition can also be detected by a microcontroller or external comparator by measuring the sense amplifier output.

### Features and Benefits

.
PWM input for LED Brightness Control
.
Open LED Detection
.
Latch-off Overcurrent Protection
.
Constant Voltage Regulated Output
.
Regulated Voltage Range: 12.5V to 27V
.
Supply range: 9V to 27 V
.
Operating current: 300 µA
.
Shutdown current: 10 µA
.
Temperature range -40°C to +125°C
.
8-lead MSOP package
AD8240YRMZ中文资料参数规格
技术参数

频率 500 Hz

电源电压DC 2.60 V, 5.50 V max

输出接口数 1

输入电压DC 9.00V ~ 27.0V

输出电压 12 V

输出电流 500 mA

供电电流 360 mA

针脚数 8

工作温度Max 125 ℃

工作温度Min -40 ℃

电源电压 9V ~ 27V

输入电压 9V ~ 27V

封装参数

安装方式 Surface Mount

引脚数 8

封装 MSOP-8

外形尺寸

宽度 3 mm

封装 MSOP-8

物理参数

工作温度 -40℃ ~ 125℃

其他

产品生命周期 Active

包装方式 Tube

制造应用 汽车级

符合标准

RoHS标准 RoHS Compliant

含铅标准 Lead Free

REACH SVHC标准 No SVHC

REACH SVHC版本 2016/06/20

数据手册

AD8240YRMZ引脚图与封装图
AD8240YRMZ引脚图
AD8240YRMZ封装图
AD8240YRMZ电路图
AD8240YRMZ封装焊盘图
在线购买AD8240YRMZ
型号: AD8240YRMZ
制造商: ADI 亚德诺
描述:ANALOG DEVICES  AD8240YRMZ  芯片, 发光二极管驱动器, 线性, MSOP-8
替代型号AD8240YRMZ
型号/品牌 代替类型 替代型号对比

AD8240YRMZ

ADI 亚德诺

当前型号

当前型号

AD8240YRMZ-R7

亚德诺

类似代替

AD8240YRMZ和AD8240YRMZ-R7的区别

AD8240YRMZ-RL

亚德诺

类似代替

AD8240YRMZ和AD8240YRMZ-RL的区别

AD8240YRM

亚德诺

类似代替

AD8240YRMZ和AD8240YRM的区别

锐单商城 - 一站式电子元器件采购平台