LTC4006EGN-2#PBF

LINEAR TECHNOLOGY  LTC4006EGN-2#PBF  芯片, 锂电池充电控制器, 4A

The is a high efficiency complete constant-current/constant-voltage Charger Controller for 2-, 3- or 4-cell lithium batteries in a small package using few external components. The PWM controller is a synchronous, quasi-constant frequency, constant off-time architecture that will not generate audible noise even when using ceramic capacitors. Charging current is programmable with a single sense resistor to ±4% typical accuracy. Charging current can be monitored as a representative voltage at the IMON pin. Charging terminates if the low-battery condition persists for more than 25% of the total charge time. It includes a thermistor sensor input that suspends charging if an unsafe temperature condition is detected and automatically resumes charging when the battery temperature returns to within safe limits. A timer, programmed by an external resistor, sets the total charge time or is reset to 25% of total charge time after C/10 charging current is reached.

.

Up to 96% high conversion efficiency

.

Built-in charge termination with automatic restart

.

AC adapter current limiting maximizes charge rate

.

Automatic conditioning of deeply discharged batteries

.

Thermistor input for temperature qualified charging

.

98% Maximum duty cycle

.

±4% Accurate Programmable charge current

.

Charging current monitor output