LT1630CS8#PBF

LINEAR TECHNOLOGY  LT1630CS8#PBF  运算放大器, 双路, 30 MHz, 2个放大器, 10 V/µs, 2.7V 至 ± 15V, SOIC, 8 引脚

The is a dual rail-to-rail input and output Operational Amplifier with a 30MHz gain-bandwidth product and a 10V/µs slew rate. The LT1630 has excellent DC precision over the full range of operation. Input offset voltage is typically less than 150µV and the minimum open-loop gain of one million into a 10k load virtually eliminates all gain error. To maximize common mode rejection, the LT1630 employ a patented trim technique for both input stages, one at the negative supply and the other at the positive supply, that gives a typical CMRR of 106dB over the full input range. The LT1630 maintain their performance for supplies from 2.7 to 36V and are specified at 3, 5 and ±15V supplies. The inputs can be driven beyond the supplies without damage or phase reversal of the output. The output delivers load currents in excess of 35mA.

.

3.5mA per Amplifier Low supply current

.

525µV Maximum input offset voltage, rail-to-rail

.

150nA Maximum input offset current

.

1000nA Maximum input bias current

.

1000V/mV Minimum open-loop gain

.

6nV/√Hz Typical low input noise voltage

.

-91dBc at 100kHz Low distortion