LPC3220FET296,551

LPC3220FET296 - ARM926EJ-S，带128 kB SRAM、高速USB OTG、SD/MMC以及NAND闪存控制器

Overview

The LPC3220 operates at CPU frequencies of up to 266 MHz. The ® implementation uses an ARM926EJ-S CPU core with a Harvard architectur, 5-stage pipeline, and an integral Memory Management Unit MMU. The LPC3220 also includes 128 kB of on-chip static RAM, a NAND flash interface, and an external bus interface that supports SDR and DDR SDRAM, as well as static devices. In addition, the LPC3220 includes a USB 2.0 full-speed interface, seven UARTs, two I2C-bus interfaces, two SPI/SSP ports, two I2S-bus interfaces, two single output PWMs, a motor control PWM, six general purpose timers with capture inputs and compare outputs, a Secure Digital SD interface, and a 10-bit Analog-to-Digital Converter ADC with a touch screen sense option.

MoreLess

## Features

* ARM926EJS processor, running at CPU clock speeds up to 266 MHz

* Vector Floating Point VFP coprocessor

* 32 kB instruction cache and a 32 kB data cache

* Up to 128 kB of Internal SRAM IRAM

* Selectable boot-up from various external devices

* Multi-layer AHB system that provides a separate bus for each AHB master

* External memory controller for DDR and SDR SDRAM as well as for static devices

* Two NAND flash controllers

* Master Interrupt Controller MIC and two Slave Interrupt Controllers SIC

* Eight channel General Purpose DMA GPDMA controller on the AHB

* USB interface supporting either device, host OHCI compliant, or On-The-Go

* Four standard UARTs with fractional baud rate generation

* Three additional high-speed UARTs intended for on-board communications

* Two SPI controllers

* Two SSP controllers

* Two I2C-bus interfaces with standard open-drain pins

* Two I2S-bus interfaces, each with separate input and output channels

* Secure Digital SD memory card interface

* General Purpose GP input, output, and I/O pins

* 10 bit, 400 kHz Analog-to-Digital Converter ADC

* Real-Time Clock RTC with separate power pin and dedicated 32 kHz oscillator

* 32-bit general purpose high-speed timer with a 16-bit pre-scaler

* Six enhanced timer/counters

* 32-bit millisecond timer driven from the RTC clock

* WatchDog timer clocked by the peripheral clock

* Two single-output PWM blocks

* Motor control PWM

* Keyboard scanner function allows automatic scanning of an up to 8 x 8 key matrix

* Up to 18 external interrupts

* Standard ARM test/debug interface for compatibility with existing tools

* Emulation Trace Buffer ETB with 2048 x 24 bit RAM allows trace via JTAG

* Stop mode saves power

* On-chip crystal oscillator

* An on-chip PLL allows CPU operation up to the maximum CPU rate

* Boundary scan for simplified board testing

## Target Applications

* Consumer

* Medical

* Industrial

* Network control

## Features