LP5900SD-2.8/NOPB

LP5900SD-2.8/NOPB图片1
LP5900SD-2.8/NOPB图片2
LP5900SD-2.8/NOPB图片3
LP5900SD-2.8/NOPB图片4
LP5900SD-2.8/NOPB图片5
LP5900SD-2.8/NOPB图片6
LP5900SD-2.8/NOPB图片7
LP5900SD-2.8/NOPB图片8
LP5900SD-2.8/NOPB图片9
LP5900SD-2.8/NOPB概述

TEXAS INSTRUMENTS  LP5900SD-2.8/NOPB  固定电压稳压器, LDO, 2.5V至5.5V, 80mV压差, 2.8V输出, 150mA输出, WSON-6

PMIC - 稳压器 - 线性 正 固定 输出 150mA 6-WSON(2.2x2.5)


得捷:
IC REG LINEAR 2.8V 150MA 6WSON


立创商城:
LP5900SD-2.8/NOPB


德州仪器TI:
150-mA, low-noise, low-IQ, low-dropout voltage regulator with enable


e络盟:
TEXAS INSTRUMENTS  LP5900SD-2.8/NOPB  固定电压稳压器, LDO, 2.5V至5.5V, 80mV压差, 2.8V输出, 150mA输出, WSON-6


艾睿:
If you need to maintain a steady voltage on your circuit, then this LDO LP5900SD-2.8/NOPB linear regulator from Texas Instruments is perfect for you! It has an overall accuracy of ±2 %. Its typical dropout voltage at current is 0.08@150mA V. This voltage regulation device&s;s single output can produce a current up to 0.15 A. The best way to provide power to your application is by using this, which needs a voltage of at least 2.5 V and no higher than 5.5 V. With a fixed output that has a voltage of 2.8 V, this is power management at its best. At a load regulation of 0.001%/mATyp and line regulation of 0.05%/VTyp a constant current can be produced at the output of your circuit. In order to ensure safe delivery and enable quick mounting of this component after delivery, it will be encased in tape and reel packaging during shipment. This voltage regulation device has a minimum operating temperature of -40 °C and a maximum of 85 °C. Its polarity is positive. The maximum dropout voltage is 0.15@150mA V.


安富利:
LDO Regulator Pos 2.8V 0.15A 6-Pin LLP EP T/R


Chip1Stop:
LDO Regulator Pos 2.8V 0.15A 6-Pin LLP EP T/R


Verical:
LDO Regulator Pos 2.8V 0.15A 6-Pin WSON EP T/R


Newark:
# TEXAS INSTRUMENTS  LP5900SD-2.8/NOPB  Fixed LDO Voltage Regulator, 2.5V to 5.5V, 80mV Dropout, 2.8Vout, 150mAout, LLP-6


DeviceMart:
IC REG LDO 2.8V .15A 6-LLP


LP5900SD-2.8/NOPB中文资料参数规格
技术参数

输出接口数 1

输出电压 2.8 V

输出电流 150 mA

供电电流 50µA ~ 230µA

针脚数 6

静态电流 25.0 µA

输出电容类型 Ceramic

跌落电压 80 mV

调节输出数 1

输入电压Max 5.5 V

输入电压Min 2.5 V

输出电压Min 2.8 V

输出电流Max 0.15 A

工作温度Max 125 ℃

工作温度Min -40 ℃

精度 ±2 %

输入电压 ≤5.5 V

封装参数

安装方式 Surface Mount

引脚数 6

封装 WDFN-6

外形尺寸

封装 WDFN-6

物理参数

工作温度 -40℃ ~ 85℃

其他

产品生命周期 Active

包装方式 Tape & Reel TR

符合标准

RoHS标准 RoHS Compliant

含铅标准 Lead Free

REACH SVHC标准 No SVHC

REACH SVHC版本 2015/06/15

数据手册

LP5900SD-2.8/NOPB引脚图与封装图
LP5900SD-2.8/NOPB引脚图
LP5900SD-2.8/NOPB封装图
LP5900SD-2.8/NOPB封装焊盘图
在线购买LP5900SD-2.8/NOPB
型号: LP5900SD-2.8/NOPB
制造商: TI 德州仪器
描述:TEXAS INSTRUMENTS  LP5900SD-2.8/NOPB  固定电压稳压器, LDO, 2.5V至5.5V, 80mV压差, 2.8V输出, 150mA输出, WSON-6
替代型号LP5900SD-2.8/NOPB
型号/品牌 代替类型 替代型号对比

LP5900SD-2.8/NOPB

TI 德州仪器

当前型号

当前型号

LP5900SD-2.8

德州仪器

完全替代

LP5900SD-2.8/NOPB和LP5900SD-2.8的区别

LP5900SDX-2.8/NOPB

德州仪器

类似代替

LP5900SD-2.8/NOPB和LP5900SDX-2.8/NOPB的区别

LP5900SDX-2.8

德州仪器

类似代替

LP5900SD-2.8/NOPB和LP5900SDX-2.8的区别

锐单商城 - 一站式电子元器件采购平台