LP38693MP-1.8/NOPB

LP38693MP-1.8/NOPB图片1
LP38693MP-1.8/NOPB图片2
LP38693MP-1.8/NOPB图片3
LP38693MP-1.8/NOPB图片4
LP38693MP-1.8/NOPB图片5
LP38693MP-1.8/NOPB图片6
LP38693MP-1.8/NOPB图片7
LP38693MP-1.8/NOPB图片8
LP38693MP-1.8/NOPB图片9
LP38693MP-1.8/NOPB图片10
LP38693MP-1.8/NOPB图片11
LP38693MP-1.8/NOPB概述

TEXAS INSTRUMENTS  LP38693MP-1.8/NOPB  固定电压稳压器, LDO, 2.7V至10V, 250mV压差, 1.8V输出, 500mA输出, SOT-223-5

PMIC - 稳压器 - 线性 正 固定 1 输出 500mA SOT-223-5


立创商城:
LP38693MP-1.8/NOPB


德州仪器TI:
500-mA, 10-V, low-dropout voltage regulator with enable


得捷:
IC REG LIN 1.8V 500MA SOT223-5


贸泽:
LDO Voltage Regulators 500mA Low Dropout CMOS Linear Reg


e络盟:
固定电压稳压器, LDO, 2.7V至10V, 250mV压差, 1.8V输出, 500mA输出, SOT-223-5


艾睿:
Never worry about components not turning off and on due to lack of voltage with this LDO LP38693MP-1.8/NOPB linear regulator from Texas Instruments. It has an overall accuracy of ±2 %. This voltage regulation device&s;s single output can produce a current up to 0.5 A. With a small input voltage of 2.7 V and a max of 10 V, this will supply sufficient power to your circuit. With a fixed output that has a voltage of 1.8 V, this is power management at its best. A load regulation of 1.8%/ATyp and line regulation of 0.03%/VTyp is necessary for providing a constant voltage level at your output. This component will be shipped in tape and reel packaging for effective mounting and safe delivery. This voltage regulation device has an operating temperature range of -40 °C to 125 °C. Its polarity is positive.


安富利:
LDO Regulator Pos 1.8V 0.5A 5-Pin4+Tab SOT-223 T/R


Chip1Stop:
LDO Regulator Pos 1.8V 0.5A 5-Pin4+Tab SOT-223 T/R


Verical:
LDO Regulator Pos 1.8V 0.5A 5-Pin4+Tab SOT-223 T/R


Newark:
# TEXAS INSTRUMENTS  LP38693MP-1.8/NOPB  Fixed LDO Voltage Regulator, 2.7V to 10V, 250mV Dropout, 1.8Vout, 500mAout, SOT-223-5


罗切斯特:
LDO Regulator Pos 1.8V 0.5A 5-Pin4+Tab SOT-223 T/R


DeviceMart:
IC REG LDO 1.8V .5A SOT223-4


Win Source:
Linear Voltage Regulator IC Positive Fixed 1 Output 1.8V 500mA SOT-223-5


LP38693MP-1.8/NOPB中文资料参数规格
技术参数

输出接口数 1

输出电压 1.8 V

输出电流 500 mA

针脚数 5

静态电流 55.0 µA

输出电容类型 Ceramic

跌落电压 250 mV

调节输出数 1

输入电压Max 10 V

输入电压Min 2.7 V

输出电流Max 0.5 A

工作温度Max 125 ℃

工作温度Min -40 ℃

精度 ±2 %

输入电压 2.7V ~ 10V

封装参数

安装方式 Surface Mount

引脚数 5

封装 TO-261-5

外形尺寸

高度 1.6 mm

封装 TO-261-5

物理参数

工作温度 -40℃ ~ 125℃

其他

产品生命周期 Active

包装方式 Tape & Reel TR

符合标准

RoHS标准 RoHS Compliant

含铅标准 Lead Free

REACH SVHC版本 2015/06/15

数据手册

LP38693MP-1.8/NOPB引脚图与封装图
LP38693MP-1.8/NOPB引脚图
LP38693MP-1.8/NOPB封装图
LP38693MP-1.8/NOPB封装焊盘图
在线购买LP38693MP-1.8/NOPB
型号: LP38693MP-1.8/NOPB
制造商: TI 德州仪器
描述:TEXAS INSTRUMENTS  LP38693MP-1.8/NOPB  固定电压稳压器, LDO, 2.7V至10V, 250mV压差, 1.8V输出, 500mA输出, SOT-223-5
替代型号LP38693MP-1.8/NOPB
型号/品牌 代替类型 替代型号对比

LP38693MP-1.8/NOPB

TI 德州仪器

当前型号

当前型号

LP38693MPX-1.8/NOPB

德州仪器

类似代替

LP38693MP-1.8/NOPB和LP38693MPX-1.8/NOPB的区别

LP38693MP-1.8

德州仪器

类似代替

LP38693MP-1.8/NOPB和LP38693MP-1.8的区别

 锐单商城 - 一站式电子元器件采购平台  

 深圳锐单电子有限公司