TEXAS INSTRUMENTS LM1086IT-3.3/NOPB 固定电压稳压器, LDO, 2.6V至27V, 1.3V压差, 3.3V输出, 1.5A输出, TO-220-3
LDO(低压降)线性稳压器,1.5A,LM1086 系列,Texas Instruments
电流限制和热保护
### LDO(低压降)线性稳压器,Texas Instruments
低压降或 LDO 为线性电压稳压器。 我们有多种系列的线性稳压器。 LDO 稳压器可在输入 - 输出差分电压较小时运行。 LDO 电压稳压器可提供快速瞬态响应、宽输入电压范围、低静态电流、低噪声、高 PSRR。
欧时:
### LDO(低压降)线性稳压器,1.5A,LM1086 系列,Texas Instruments电流限制和热保护 ### LDO(低压降)线性稳压器,Texas Instruments低压降或 LDO 为线性电压稳压器。 我们有多种系列的线性稳压器。 LDO 稳压器可在输入 - 输出差分电压较小时运行。 LDO 电压稳压器可提供快速瞬态响应、宽输入电压范围、低静态电流、低噪声、高 PSRR。
得捷:
IC REG LINEAR 3.3V 1.5A TO220-3
立创商城:
正 Vin=27V Vout=3.3V 1.5A 72dB@120Hz
德州仪器TI:
1.5-A, 29-V, linear voltage regulator
贸泽:
低压差稳压器 1.5A LDO Pos Regs
艾睿:
Never worry about components seeing unstable voltages again by implementing this LDO LM1086IT-3.3/NOPB linear regulator manufactured by Texas Instruments. Its typical dropout voltage at current is 1.3@1.5A V. This voltage regulation device&s;s single output can produce a current up to 1.5 A. Supply your circuit with sufficient power by implementing this, which requires a minimum input voltage of 2.6 V that does not exceed 30 V. With a fixed output that has a voltage of 3.3 V, this is power management at its best. By operating at a load regulation of 0.1%Typ and line regulation of 10mV you can provide a constant voltage at your output. In order to ensure parts aren&s;t damaged by bulk packaging, this product comes in tube packaging to add a little more protection by storing the loose parts in an outer tube. This voltage regulation device has a minimum operating temperature of -40 °C and a maximum of 125 °C. The maximum dropout voltage is 1.5@1.5A V. Its polarity is positive.
安富利:
LDO Regulator Pos 3.3V 1.5A 3-Pin3+Tab TO-220 Rail
Chip1Stop:
LDO Regulator Pos 3.3V 1.5A 3-Pin3+Tab TO-220 Rail
TME:
Voltage regulator; LDO, fixed; 3V; 1.5A; TO220; THT; Package: tube
Verical:
LDO Regulator Pos 3.3V 1.5A 3-Pin3+Tab TO-220 Tube
Newark:
# TEXAS INSTRUMENTS LM1086IT-3.3/NOPB Fixed LDO Voltage Regulator, 2.6V to 27V, 1.3V Dropout, 3.3Vout, 1.5Aout, TO-220-3
DeviceMart:
IC REG LDO 3.3V 1.5A TO220-3
工作电压 4.75V ~ 18V
输出接口数 1
输入电压DC 27.0V max
输出电压 3.3 V
输出电流 1.5 A
供电电流 5mA ~ 10mA
通道数 1
针脚数 3
静态电流 10 mA
输出电容类型 Ceramic
跌落电压 1.3 V
调节输出数 1
输入电压Max 27 V
输入电压Min 2.6 V
输出电压Min 3.3 V
输出电流Max 1.5 A
工作温度Max 125 ℃
工作温度Min -40 ℃
电源电压Min 4.75 V
输入电压 ≤27 V
安装方式 Through Hole
引脚数 3
封装 TO-220-3
长度 10.16 mm
宽度 4.7 mm
高度 8.89 mm
封装 TO-220-3
工作温度 -40℃ ~ 125℃
产品生命周期 Active
包装方式 Each
制造应用 电源管理
RoHS标准 RoHS Compliant
含铅标准 Lead Free
REACH SVHC标准 No SVHC
REACH SVHC版本 2015/06/15
型号/品牌 | 代替类型 | 替代型号对比 |
---|---|---|
LM1086IT-3.3/NOPB TI 德州仪器 | 当前型号 | 当前型号 |
LM1084IT-3.3/NOPB 德州仪器 | 完全替代 | LM1086IT-3.3/NOPB和LM1084IT-3.3/NOPB的区别 |
LM1086CT-3.3/NOPB 德州仪器 | 完全替代 | LM1086IT-3.3/NOPB和LM1086CT-3.3/NOPB的区别 |
LM1086CT-3.3 德州仪器 | 类似代替 | LM1086IT-3.3/NOPB和LM1086CT-3.3的区别 |