LDO(低压降)线性电压调节器,600mA 至 800mA,Texas Instruments### LDO(低压降)线性电压调节器,Texas Instruments低压降或 LDO 为线性电压稳压器。 我们有多种系列的线性稳压器。 LDO 稳压器可在输入 - 输出差分电压较小时运行。 LDO 电压稳压器可提供快速瞬态响应、宽输入电压范围、低静态电流、低噪声、高 PSRR。
LDO(低压降)线性稳压器,600mA 至 800mA,Texas Instruments
得捷:
IC REG LIN 2.5V 800MA SOT223-5
立创商城:
LP3964EMP-2.5/NOPB
德州仪器TI:
800-mA, low-dropout voltage regulator with enable & sense
欧时:
Texas Instruments LP3964EMP-2.5/NOPB 快速低压降稳压器, 2.5 V输出, 800mA最大输出, ±1.5%精确度
e络盟:
TEXAS INSTRUMENTS LP3964EMP-2.5/NOPB 固定电压稳压器, LDO, 2.5V至7V, 240mV压差, 2.5V输出, 800mA输出, SOT-223-5
艾睿:
Don&s;t let unpredictable voltage levels ruin your circuit! Use this LDO LP3964EMP-2.5/NOPB linear regulator from Texas Instruments to control your voltage levels! It has an overall accuracy of ±1.5 %. Its typical dropout voltage at current is 0.024@80mA|0.24@800mA V. This voltage regulation device&s;s single output can produce a current up to 0.8 A. Supply your circuit with sufficient power by implementing this, which requires a minimum input voltage of 2.5 V that does not exceed 7 V. With a fixed output that has a voltage of 2.5 V, this is power management at its best. Maintain a constant voltage level with a load regulation of 0.02%Typ and line regulation of 0.02%Typ. In order to ensure safe delivery and enable quick mounting of this component after delivery, it will be encased in tape and reel packaging during shipment. The maximum dropout voltage is 0.03@80mA|0.3@800mA V. Its polarity is positive. This voltage regulation device has a minimum operating temperature of -40 °C and a maximum of 125 °C.
安富利:
LDO Regulator Pos 2.5V 0.8A 5-Pin4+Tab SOT-223 T/R
Chip1Stop:
LDO Regulator Pos 2.5V 0.8A 5-Pin4+Tab SOT-223 T/R
Verical:
LDO Regulator Pos 2.5V 0.8A 5-Pin4+Tab SOT-223 T/R
Newark:
# TEXAS INSTRUMENTS LP3964EMP-2.5/NOPB Fixed LDO Voltage Regulator, 2.5V to 7V, 240mV Dropout, 2.5Vout, 800mAout, SOT-223-5
DeviceMart:
IC REG LDO 2.5V .8A SOT223-5
Win Source:
Linear Voltage Regulator IC Positive Fixed 1 Output 2.5V 800mA SOT-223-5
电源电压DC 7.50V max
额定电流 800 A
输出接口数 1
输入电压DC 7.00V max
输出电压 2.5 V
输出电流 800 mA
供电电流 9mA ~ 15mA
针脚数 5
静态电流 3.00 mA
输出电容类型 Ceramic
跌落电压 240 mV
调节输出数 1
输入电压Max 7 V
输入电压Min 2.5 V
输出电压Min 2.5 V
输出电流Max 0.8 A
工作温度Max 125 ℃
工作温度Min -40 ℃
精度 ±1.5 %
电源电压Max 7 V
输入电压 ≤7 V
安装方式 Surface Mount
引脚数 5
封装 TO-261-5
长度 6.5 mm
宽度 3.56 mm
高度 1.6 mm
封装 TO-261-5
工作温度 -40℃ ~ 125℃
产品生命周期 Active
包装方式 Tape & Reel TR
RoHS标准 RoHS Compliant
含铅标准 Lead Free
REACH SVHC标准 No SVHC
REACH SVHC版本 2015/06/15
型号/品牌 | 代替类型 | 替代型号对比 |
---|---|---|
LP3964EMP-2.5/NOPB TI 德州仪器 | 当前型号 | 当前型号 |
LP3965EMP-2.5/NOPB 德州仪器 | 完全替代 | LP3964EMP-2.5/NOPB和LP3965EMP-2.5/NOPB的区别 |
LP3964EMP-2.5 德州仪器 | 完全替代 | LP3964EMP-2.5/NOPB和LP3964EMP-2.5的区别 |
LP3964EMPX-2.5 德州仪器 | 完全替代 | LP3964EMP-2.5/NOPB和LP3964EMPX-2.5的区别 |