TEXAS INSTRUMENTS LM9076S-5.0/NOPB 芯片, 稳压器, LDO, 5V, 150mA, TO-263-5
LDO(低压降)线性稳压器,150mA,4.0V 至 12V,Texas Instruments
### LDO(低压降)线性稳压器,Texas Instruments
低压降或 LDO 为线性电压稳压器。 我们有多种系列的线性稳压器。 LDO 稳压器可在输入 - 输出差分电压较小时运行。 LDO 电压稳压器可提供快速瞬态响应、宽输入电压范围、低静态电流、低噪声、高 PSRR。
欧时:
### LDO(低压降)线性稳压器,150mA,4.0V 至 12V,Texas Instruments### LDO(低压降)线性稳压器,Texas Instruments低压降或 LDO 为线性电压稳压器。 我们有多种系列的线性稳压器。 LDO 稳压器可在输入 - 输出差分电压较小时运行。 LDO 电压稳压器可提供快速瞬态响应、宽输入电压范围、低静态电流、低噪声、高 PSRR。
立创商城:
LM9076S-5.0/NOPB
德州仪器TI:
150-mA, 40-V, low-dropout voltage regulator
得捷:
IC REG LIN 5V 150MA DDPAK/TO263
贸泽:
低压差稳压器 Ultra Low Iq 150Ma LDO VReg
e络盟:
芯片, 稳压器, LDO, 5V, 150mA, TO-263-5
艾睿:
This LDO LM9076S-5.0/NOPB linear regulator from Texas Instruments gives you control over the voltage levels of your circuit. Its typical dropout voltage at current is 0.03@10mA|0.08@50mA|0.15@150mA V. It has an overall accuracy of ±3 %. This voltage regulation device&s;s single output can produce a current up to 0.15 A. Supply your circuit with sufficient power by implementing this, which requires a minimum input voltage of 5.35 V that does not exceed 40 V. With a fixed output that has a voltage of 5 V, this is power management at its best. Using a load regulation of 60mV and line regulation of 35mV is needed for a programmable DC power supply. In order to ensure parts aren&s;t damaged by bulk packaging, this product comes in tube packaging to add a little more protection by storing the loose parts in an outer tube. The maximum dropout voltage is 0.05@10mA|0.25@150mA V. This voltage regulation device has a minimum operating temperature of -40 °C and a maximum of 125 °C. Its polarity is positive.
安富利:
LDO Regulator Pos 5V 0.15A 6-Pin5+Tab TO-263 Rail
Chip1Stop:
LDO Regulator Pos 5V 0.15A 6-Pin5+Tab TO-263 Rail
Verical:
LDO Regulator Pos 5V 0.15A Automotive 6-Pin5+Tab DDPAK Tube
Newark:
# TEXAS INSTRUMENTS LM9076S-5.0/NOPB Fixed LDO Voltage Regulator, 5.35V to 40V, 250mV Dropout, 5Vout, 150mAout, TO-263-5
DeviceMart:
IC REG LDO 5V .15A TO-263
Win Source:
Linear Voltage Regulator IC Positive Fixed 1 Output 5V 150mA DDPAK/TO-263-5
容差 ±3 %
输出接口数 1
输入电压DC 40.0V max
输出电压 5 V
输出电流 150 mA
供电电流 45µA ~ 4.5mA
针脚数 5
静态电流 4.5 mA
输出电容类型 Ceramic
跌落电压 250 mV
调节输出数 1
输入电压Max 40 V
输入电压Min 5.35 V
输出电压Min 5 V
输出电流Max 0.15 A
工作温度Max 125 ℃
工作温度Min -40 ℃
精度 ±3 %
输入电压 5.35V ~ 40V
安装方式 Surface Mount
引脚数 5
封装 TO-263-6
长度 10.16 mm
宽度 8.64 mm
高度 4.57 mm
封装 TO-263-6
工作温度 -40℃ ~ 125℃
产品生命周期 Active
包装方式 Tube
RoHS标准
含铅标准 Lead Free
REACH SVHC版本 2015/06/15
型号/品牌 | 代替类型 | 替代型号对比 |
---|---|---|
LM9076S-5.0/NOPB TI 德州仪器 | 当前型号 | 当前型号 |
LM9076SX-5.0/NOPB 德州仪器 | 类似代替 | LM9076S-5.0/NOPB和LM9076SX-5.0/NOPB的区别 |
LM9076S-5.0 德州仪器 | 类似代替 | LM9076S-5.0/NOPB和LM9076S-5.0的区别 |
LM9076SX-5.0 德州仪器 | 类似代替 | LM9076S-5.0/NOPB和LM9076SX-5.0的区别 |