TEXAS INSTRUMENTS LP3964ES-ADJ/NOPB 电压稳压器, LDO, 可调, 2.5V至7V输入, 240mV压差, 1.215V至5V/0.8A输出, TO-263-5
可调 LDO(低压降)线性稳压器,300mA 至 800mA,Texas Instruments
### LDO(低压降)线性稳压器,Texas Instruments
低压降或 LDO 为线性电压稳压器。 我们有多种系列的线性稳压器。 LDO 稳压器可在输入 - 输出差分电压较小时运行。 LDO 电压稳压器可提供快速瞬态响应、宽输入电压范围、低静态电流、低噪声、高 PSRR。
得捷:
IC REG LIN POS ADJ 800MA DDPAK
立创商城:
LP3964ES-ADJ/NOPB
德州仪器TI:
800-mA, low-dropout voltage regulator with enable & sense
欧时:
Texas Instruments LP3964ES-ADJ/NOPB 快速低压降稳压器, 可调输出, 1.2 → 5 V输出, 800mA最大输出
e络盟:
电压稳压器, LDO, 可调, 2.5V至7V输入, 240mV压差, 1.215V至5V/0.8A输出, TO-263-5
艾睿:
Maintain a steady voltage level with this LDO LP3964ES-ADJ/NOPB linear regulator from Texas Instruments. It has an overall accuracy of ±1.5 %. Its typical dropout voltage at current is 0.024@80mA|0.24@800mA V. This voltage regulation device&s;s single output can produce a current up to 0.8 A. This will operate at a minimum voltage of 2.5 V and a maximum voltage of 7 V, making it easy to control the power in your circuit. With an adjustable output that has a voltage of 1.2 to 5 V, this is power management at its best. At a load regulation of 0.02%Typ and line regulation of 0.02%Typ your circuit is capable of maintaining a constant voltage level at your output. In order to ensure parts aren&s;t damaged by bulk packaging, this product comes in tube packaging to add a little more protection by storing the loose parts in an outer tube. Its polarity is positive. The maximum dropout voltage is 0.03@80mA|0.3@800mA V. This voltage regulation device has a minimum operating temperature of -40 °C and a maximum of 125 °C.
Chip1Stop:
LDO Regulator Pos 1.2V to 5V 0.8A 6-Pin5+Tab TO-263 Rail
Verical:
LDO Regulator Pos 1.2V to 5V 0.8A 6-Pin5+Tab TO-263 Tube
Newark:
# TEXAS INSTRUMENTS LP3964ES-ADJ/NOPB V REG LDO ADJ +1.2/5.1V, SMD, 3964
DeviceMart:
IC REG LDO ADJ .8A TO-263-5
Win Source:
Linear Voltage Regulator IC Positive Adjustable 1 Output 1.216 V ~ 5.1 V 800mA DDPAK/TO-263-5
额定电流 800 A
输出接口数 1
输入电压DC 7.00V max
输出电压 1.2V ~ 5V
输出电流 800 mA
供电电流 9mA ~ 15mA
针脚数 5
静态电流 3.00 mA
输出电容类型 Ceramic
跌落电压 240 mV
调节输出数 1
输入电压Max 7 V
输入电压Min 2.5 V
输出电压Max 5 V
输出电压Min 1.215 V
输出电流Max 0.8 A
工作温度Max 125 ℃
工作温度Min -40 ℃
精度 ±1.5 %
输入电压 2.5V ~ 7V
安装方式 Surface Mount
引脚数 5
封装 TO-263-6
长度 10.16 mm
宽度 8.64 mm
高度 4.57 mm
封装 TO-263-6
工作温度 -40℃ ~ 125℃
产品生命周期 Active
包装方式 Each
制造应用 消费电子产品, 通信与网络, 电源管理
RoHS标准
含铅标准 Lead Free
REACH SVHC标准 No SVHC
REACH SVHC版本 2015/06/15
型号/品牌 | 代替类型 | 替代型号对比 |
---|---|---|
LP3964ES-ADJ/NOPB TI 德州仪器 | 当前型号 | 当前型号 |
LP3966ES-ADJ/NOPB 德州仪器 | 完全替代 | LP3964ES-ADJ/NOPB和LP3966ES-ADJ/NOPB的区别 |
LP3964ES-ADJ 德州仪器 | 完全替代 | LP3964ES-ADJ/NOPB和LP3964ES-ADJ的区别 |
LP3965ES-ADJ/NOPB 德州仪器 | 类似代替 | LP3964ES-ADJ/NOPB和LP3965ES-ADJ/NOPB的区别 |