LP3872EMP-1.8/NOPB

LP3872EMP-1.8/NOPB图片1
LP3872EMP-1.8/NOPB图片2
LP3872EMP-1.8/NOPB图片3
LP3872EMP-1.8/NOPB图片4
LP3872EMP-1.8/NOPB图片5
LP3872EMP-1.8/NOPB图片6
LP3872EMP-1.8/NOPB概述

LP3872 / LP3875 1.5A快速超低压降线性稳压器 LP3872/LP3875 1.5A Fast Ultra Low Dropout Linear Regulators

PMIC - 稳压器 - 线性 正 固定 1 输出 1.5A SOT-223-5


立创商城:
LP3872EMP-1.8/NOPB


德州仪器TI:
1.5-A, low-dropout voltage regulator with power good & enable


得捷:
IC REG LINEAR 1.8V 1.5A SOT223-5


贸泽:
LDO Voltage Regulators 1.5A Fast Ultra Low Dropout Linear Regulator 5-SOT-223 -40 to 125


艾睿:
If you need to maintain a steady voltage on your circuit, then this LDO LP3872EMP-1.8/NOPB linear regulator from Texas Instruments is perfect for you! Its typical dropout voltage at current is 0.038@150mA|0.38@1.5A V. It has an overall accuracy of ±1.5 %. This voltage regulation device&s;s single output can produce a current up to 1.5 A. Supply your circuit with sufficient power by implementing this, which requires a minimum input voltage of 2.5 V that does not exceed 7 V. With a fixed output that has a voltage of 1.8 V, this is power management at its best. Using a load regulation of 0.06%Typ and line regulation of 0.02%Typ is needed for a programmable DC power supply. In order to guarantee safe delivery and allow for quick mounting of this component after delivery, it will be enclosed in tape and reel packaging during shipment. This voltage regulation device has a minimum operating temperature of -40 °C and a maximum of 125 °C. The maximum dropout voltage is 0.05@150mA|0.45@1.5A V. Its polarity is positive.


安富利:
LDO Regulator Pos 1.8V 1.5A 5-Pin4+Tab SOT-223 T/R


Chip1Stop:
LDO Regulator Pos 1.8V 1.5A 5-Pin4+Tab SOT-223 T/R


Verical:
LDO Regulator Pos 1.8V 1.5A 5-Pin4+Tab SOT-223 T/R


罗切斯特:
LDO Regulator Pos 1.8V 1.5A 5-Pin4+Tab SOT-223 T/R


Win Source:
Linear Voltage Regulator IC Positive Fixed 1 Output 1.8V 1.5A SOT-223-5


LP3872EMP-1.8/NOPB中文资料参数规格
技术参数

输出接口数 1

输出电压 1.8 V

输出电流 1.5 A

供电电流 5mA ~ 15mA

静态电流 6.00 mA

输出电容类型 Ceramic

跌落电压 380 mV

调节输出数 1

输入电压Max 7 V

输入电压Min 2.5 V

输出电压Min 1.8 V

输出电流Max 1.5 A

工作温度Max 125 ℃

工作温度Min -40 ℃

精度 ±1.5 %

输入电压 2.5V ~ 7V

封装参数

安装方式 Surface Mount

引脚数 5

封装 TO-261-5

外形尺寸

高度 1.6 mm

封装 TO-261-5

物理参数

工作温度 -40℃ ~ 125℃

其他

产品生命周期 Active

包装方式 Tape & Reel TR

符合标准

RoHS标准 RoHS Compliant

含铅标准 Lead Free

数据手册

LP3872EMP-1.8/NOPB引脚图与封装图
LP3872EMP-1.8/NOPB引脚图
LP3872EMP-1.8/NOPB封装图
LP3872EMP-1.8/NOPB封装焊盘图
在线购买LP3872EMP-1.8/NOPB
型号: LP3872EMP-1.8/NOPB
制造商: TI 德州仪器
描述:LP3872 / LP3875 1.5A快速超低压降线性稳压器 LP3872/LP3875 1.5A Fast Ultra Low Dropout Linear Regulators
替代型号LP3872EMP-1.8/NOPB
型号/品牌 代替类型 替代型号对比

LP3872EMP-1.8/NOPB

TI 德州仪器

当前型号

当前型号

LP3872EMPX-1.8/NOPB

德州仪器

完全替代

LP3872EMP-1.8/NOPB和LP3872EMPX-1.8/NOPB的区别

LP3872EMP-1.8

德州仪器

类似代替

LP3872EMP-1.8/NOPB和LP3872EMP-1.8的区别

 锐单商城 - 一站式电子元器件采购平台  

 深圳锐单电子有限公司