





具有使能功能的 3A、低输入电压 1.15V、高精度、超低压降稳压器 5-DDPAK/TO-263 -40 to 125
Linear Voltage Regulator IC 1 Output 3A DDPAK/TO-263-5
得捷:
IC REG LIN 1.2V 3A DDPAK/TO263-5
立创商城:
LP38856SX-1.2/NOPB
德州仪器TI:
3-A, low-VIN 1.15-V, high-accuracy, ultra-low-dropout voltage regulator with enable
艾睿:
Never worry about components not turning off and on due to lack of voltage with this LDO LP38856SX-1.2/NOPB linear regulator from Texas Instruments. Its typical dropout voltage at current is 0.24@3A V. It has an overall accuracy of ±1 %. This voltage regulation device&s;s single output can produce a current up to 3 A. The best way to provide power to your application is by using this, which needs a voltage of at least 1.15 V and no higher than 5.5 V. With a fixed output that has a voltage of 1.2 V, this is power management at its best. Users like the load regulation of 0.2%/ATyp and line regulation of 0.04%/VTyp. This component will be shipped in tape and reel packaging to allow for effective mounting and safe delivery. Its polarity is positive. This voltage regulation device has a minimum operating temperature of -40 °C and a maximum of 125 °C. The maximum dropout voltage is 0.3@3A V.
安富利:
LDO Regulator Pos 1.2V 3A 6-Pin5+Tab TO-263 T/R
Chip1Stop:
LDO Regulator Pos 1.2V 3A 6-Pin5+Tab TO-263 T/R
Verical:
LDO Regulator Pos 1.2V 3A 6-Pin5+Tab TO-263 T/R
输出接口数 1
输出电压 1.2 V
输出电流 3 A
供电电流 300µA ~ 15mA
静态电流 10.0 mA
输出电容类型 Ceramic
跌落电压 0.24V @3A
调节输出数 1
输入电压Max 5.5 V
输入电压Min 1.15 V
输出电压Min 1.2 V
输出电流Max 3 A
工作温度Max 125 ℃
工作温度Min -40 ℃
精度 ±1 %
输入电压 ≤5.5 V
安装方式 Surface Mount
引脚数 6
封装 TO-263-6
封装 TO-263-6
工作温度 -40℃ ~ 125℃
产品生命周期 Active
包装方式 Tape & Reel TR
RoHS标准
含铅标准 Contains Lead



| 型号/品牌 | 代替类型 | 替代型号对比 |
|---|---|---|
LP38856SX-1.2/NOPB TI 德州仪器 | 当前型号 | 当前型号 |
LP38856SX-1.2 德州仪器 | 完全替代 | LP38856SX-1.2/NOPB和LP38856SX-1.2的区别 |
LP38856S-1.2/NOPB 德州仪器 | 类似代替 | LP38856SX-1.2/NOPB和LP38856S-1.2/NOPB的区别 |
LP38843S-1.2/NOPB 德州仪器 | 类似代替 | LP38856SX-1.2/NOPB和LP38843S-1.2/NOPB的区别 |