LP38853 3A快速响应高精度可调LDO线性稳压器与启用和软启动 LP38853 3A Fast-Response High-Accuracy Adjustable LDO Linear Regulator with Enable and Soft-Start
The LP38853 is a high-current, fast-response regulator that can maintain output voltage regulation with extremely low input-to-output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: VBIAS provides voltage to drive the gate of the NMOS power transistor; VIN is the input voltage which supplies power to the load. The use of an external bias rail allows the device to operate from ultra-low VIN voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an NMOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of this device makes it suitable for use in powering DSP and microcontroller core voltages, and switch-mode power-supply post regulators. Dropout Voltage: 240 mV typical at 3-A load current Low Ground Pin Current: 10 mA typical at 3-A load currentSoft Start: Programmable soft-start time
输出接口数 1
输出电压 0.8V ~ 1.8V
输出电流 3 A
供电电流 300µA ~ 9mA
静态电流 10.0 mA
输出电容类型 Ceramic
跌落电压 0.24V @3A
调节输出数 1
输入电压Max 5.5 V
输入电压Min 1.04 V
输出电压Max 1.8 V
输出电压Min 0.8 V
输出电流Max 3 A
工作温度Max 125 ℃
工作温度Min -40 ℃
精度 ±1.5 %
输入电压 5.5 V
安装方式 Surface Mount
引脚数 7
封装 TO-263-8
封装 TO-263-8
工作温度 -40℃ ~ 125℃
产品生命周期 Active
包装方式 Tube
RoHS标准
含铅标准 Lead Free
REACH SVHC版本 2015/06/15
ECCN代码 EAR99
型号/品牌 | 代替类型 | 替代型号对比 |
---|---|---|
LP38853S-ADJ/NOPB TI 德州仪器 | 当前型号 | 当前型号 |
LP38853S-ADJ 德州仪器 | 类似代替 | LP38853S-ADJ/NOPB和LP38853S-ADJ的区别 |
LP38853SX-ADJ 德州仪器 | 类似代替 | LP38853S-ADJ/NOPB和LP38853SX-ADJ的区别 |
LP38853SX-ADJ/NOPB 德州仪器 | 功能相似 | LP38853S-ADJ/NOPB和LP38853SX-ADJ/NOPB的区别 |