TEXAS INSTRUMENTS LM2677S-5.0/NOPB. 芯片, 降压稳压器, TO-263-7
SIMPLE SWITCHER® 降压调节器,LM267x 系列
欧时:
Conv DC-DC, LM2677S-5.0/NOPB
立创商城:
LM2677S-5.0/NOPB
德州仪器TI:
SIMPLE SWITCHER High Efficiency 5A Step-Down Voltage Regulator with Sync
得捷:
IC REG BUCK 5V 5A TO263-7
e络盟:
降压开关稳压器, 固定, 8V-40V输入, 5V和5A输出, 260 kHz, TO-263-7
艾睿:
Adjust the voltage level of your devices with this step down LM2677S-5.0/NOPB DC to DC converter from Texas Instruments. This converter&s;s single output can produce a current up to 5 A. This will operate at a minimum voltage of 8 V and a maximum voltage of 40 V, making it easy to control the power in your circuit. With a fixed output that has a voltage of 5 V, this is power management at its best. This converter is 84typ % efficient. Its switching regulator has a frequency of 260Typ kHz. In order to ensure parts aren&s;t damaged by bulk packaging, this product comes in tube packaging to add a little more protection by storing the loose parts in an outer tube. This converter has a minimum operating temperature of -40 °C and a maximum of 125 °C.
安富利:
Conv DC-DC Single Step Down 8V to 40V 8-Pin7+Tab TO-263 Rail
Chip1Stop:
Conv DC-DC Single Step Down 8V to 40V 8-Pin7+Tab TO-263 Rail
Verical:
Conv DC-DC 8V to 40V Synchronous Step Down Single-Out 5V 5A 8-Pin7+Tab TO-263 Tube
Newark:
# TEXAS INSTRUMENTS LM2677S-5.0/NOPB Buck Step Down Switching Regulator, Fixed, 8V-40V In, 5V And 5A Out, 260 kHz, TO-263-7
DeviceMart:
IC REG BUCK 5V 5A TO263-7
电源电压DC 40.0V max
输出接口数 1
输出电压 5 V
输出电流 5 A
针脚数 7
静态电流 4.20 mA
调节输出数 1
开关频率 260 kHz
拓扑结构 Buck
输入电压Max 40 V
输入电压Min 8 V
输出电压Min 5 V
输出电流Max 5 A
工作温度Max 125 ℃
工作温度Min -40 ℃
电源电压 8 V
输入电压 8V ~ 40V
安装方式 Surface Mount
引脚数 7
封装 TO-263-8
长度 10.16 mm
宽度 8.64 mm
高度 4.57 mm
封装 TO-263-8
工作温度 -40℃ ~ 125℃
产品生命周期 Active
包装方式 Each
RoHS标准
含铅标准 Lead Free
REACH SVHC版本 2015/06/15
ECCN代码 EAR99
型号/品牌 | 代替类型 | 替代型号对比 |
---|---|---|
LM2677S-5.0/NOPB TI 德州仪器 | 当前型号 | 当前型号 |
LM2677SX-5.0/NOPB 德州仪器 | 完全替代 | LM2677S-5.0/NOPB和LM2677SX-5.0/NOPB的区别 |
LM2677S-5.0 德州仪器 | 完全替代 | LM2677S-5.0/NOPB和LM2677S-5.0的区别 |