LP3853ET-2.5/NOPB

LP3853ET-2.5/NOPB图片1
LP3853ET-2.5/NOPB图片2
LP3853ET-2.5/NOPB图片3
LP3853ET-2.5/NOPB图片4
LP3853ET-2.5/NOPB图片5
LP3853ET-2.5/NOPB概述

具有电源正常指示和使能功能的 3A、7V、超低压降稳压器 5-TO-220 -40 to 125

PMIC - 稳压器 - 线性 正 固定 1 输出 3A TO-220-5


得捷:
IC REG LINEAR 2.5V 3A TO220-5


立创商城:
LP3853ET-2.5/NOPB


德州仪器TI:
3-A, 7-V, ultra-low-dropout voltage regulator with power good & enable


贸泽:
LDO Voltage Regulators 3A Fast Ultra Low Dropout Linear Regulator 5-TO-220 -40 to 125


艾睿:
Maintain a steady voltage level with this LDO LP3853ET-2.5/NOPB linear regulator from Texas Instruments. Its typical dropout voltage at current is 0.039@300mA|0.39@3A V. It has an overall accuracy of ±1.5 %. This voltage regulation device&s;s single output can produce a current up to 3 A. Supply your circuit with sufficient power by implementing this, which requires a minimum input voltage of 2.5 V that does not exceed 7 V. With a fixed output that has a voltage of 2.5 V, this is power management at its best. Using a load regulation of 0.08%Typ and line regulation of 0.02%Typ is needed for a programmable DC power supply. In order to ensure parts aren&s;t damaged by bulk packaging, this product comes in tube packaging to add a little more protection by storing the loose parts in an outer tube. Its polarity is positive. The maximum dropout voltage is 0.05@300mA|0.45@3A V. This voltage regulation device has a minimum operating temperature of -40 °C and a maximum of 125 °C.


Chip1Stop:
LDO Regulator Pos 2.5V 3A 5-Pin5+Tab TO-220 Rail


Verical:
LDO Regulator Pos 2.5V 3A 5-Pin5+Tab TO-220 Tube


DeviceMart:
IC REG LDO 2.5V 3A TO-220-5


LP3853ET-2.5/NOPB中文资料参数规格
技术参数

输出接口数 1

输出电压 2.5 V

输出电流 3 A

静态电流 4.00 mA

输出电容类型 Ceramic

跌落电压 390 mV

调节输出数 1

输入电压Max 7 V

输入电压Min 2.5 V

输出电流Max 3 A

工作温度Max 125 ℃

工作温度Min 40 ℃

精度 ±1.5 %

输入电压 ≤7 V

封装参数

安装方式 Through Hole

引脚数 5

封装 TO-220-5

外形尺寸

封装 TO-220-5

物理参数

工作温度 -40℃ ~ 125℃

其他

产品生命周期 Active

包装方式 Tube

符合标准

RoHS标准 RoHS Compliant

含铅标准 Lead Free

数据手册

LP3853ET-2.5/NOPB引脚图与封装图
LP3853ET-2.5/NOPB引脚图
LP3853ET-2.5/NOPB封装图
LP3853ET-2.5/NOPB封装焊盘图
在线购买LP3853ET-2.5/NOPB
型号: LP3853ET-2.5/NOPB
制造商: TI 德州仪器
描述:具有电源正常指示和使能功能的 3A、7V、超低压降稳压器 5-TO-220 -40 to 125
替代型号LP3853ET-2.5/NOPB
型号/品牌 代替类型 替代型号对比

LP3853ET-2.5/NOPB

TI 德州仪器

当前型号

当前型号

LP3853ET-2.5

德州仪器

完全替代

LP3853ET-2.5/NOPB和LP3853ET-2.5的区别

 锐单商城 - 一站式电子元器件采购平台  

 深圳锐单电子有限公司