LT1513-2IR#PBF

LINEAR TECHNOLOGY  LT1513-2IR#PBF  芯片, 电池充电器, 3A, 20V, 7D2PAK

The is a Battery Charger specially configured to create a constant- or programmable-current/constant-voltage battery charger. In addition to the usual voltage feedback node, this 500kHz current mode switching regulator has a current sense feedback circuit for accurately controlling output current of a fly back or SEPIC Single-Ended Primary Inductance Converter topology charger. These topologies allow the current sense circuit to be ground referred and completely separated from the battery itself, simplifying battery switching and system grounding problems. In addition, these topologies allow charging even when the input voltage is lower than the battery voltage. The LT1513 can also drive a CCFL Royer converter with high efficiency in floating or grounded mode. Maximum switch current on the LT1513 is 3A. This allows battery charging currents up to 2A for a single Li-ion cell. Accuracy of 1% in constant-voltage mode is perfect for lithium battery applications.

.

Charger input voltage may be higher, equal to or lower than battery voltage

.

1% Voltage accuracy for rechargeable lithium batteries

.

0mV Current sense voltage for easy current programming

.

Battery can be directly grounded

.

500kHz Switching frequency minimizes inductor size

.

Charging current easily programmable or shut down