LM158QML低功耗双运算放大器 LM158QML Low Power Dual Operational Amplifiers
DESCRIPON
The LM158 series consists of two independent, high gain, internally frequency compensated operational amplifiers which were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage.
Application areas include transducer amplifiers, dc gain blocks and all the conventional op amp circuits which now can be more easily implemented in single power supply systems. For example, the LM158 series can be directly operated off of the standard +5V power supply voltage which is used in digital systems and will easily provide the required interface electronics without requiring the additional ±15V power supplies.
FEATURES
• Available with Radiation Specification
– High Dose Rate 100 kradSi
– ELDRS Free 100 kradSi
• Internally Frequency Compensated for Unity Gain
• Large DC Voltage Gain: 100 dB
• Wide Bandwidth Unity Gain: 1 MH
zTemperature Compensated
• Wide Power Supply Range:
– Single Supply: 3V to 32V
– Or Dual Supplies: ±1.5V to ±16V
• Very Low Supply Current Drain 500 μA − Essentially Independent of Supply Voltage
• Low Input Offset Voltage: 2 mV
• Input Common-mode Voltage Range Includes Ground
• Differential Input Voltage Range Equal to the Power Supply Voltage
• Large Output Voltage Swing: 0V to V+ − 1.5V
UNIQUE CHARACTERISTICS
• In the Linear Mode the Input Common-Mode Voltage Range Includes Ground and the Output Voltage can also Swing to Ground, even though Operated from only a Single Power Supply Voltage.
• The Unity Gain Cross Frequency is Temperature Compensated.
• The Input Bias Current is also Temperature Compensated.
ADVANTAGES
• Two Internally Compensated Op Amps
• Eliminates Need for Dual Supplies
• Allows Direct Sensing Near Gnd and VO also Goes to Gnd
• Compatible with all Forms of Logic
• Power Drain Suitable for Battery Operation
输出电流 20.0 mA
通道数 2
耗散功率 830 mW
输入补偿漂移 7.00 µV/K
转换速率 500 mV/μs
增益频宽积 1 MHz
输入补偿电压 2 mV
工作温度Max 125 ℃
工作温度Min -55 ℃
耗散功率Max 830 mW
共模抑制比Min 70 dB
安装方式 Surface Mount
引脚数 10
封装 SOP-10
长度 6.86 mm
宽度 6.12 mm
高度 1.78 mm
封装 SOP-10
工作温度 -55℃ ~ 125℃
产品生命周期 Active
包装方式 Tray
RoHS标准 Non-Compliant
含铅标准 Contains Lead
型号/品牌 | 代替类型 | 替代型号对比 |
---|---|---|
LM158AWGRLQMLV TI 德州仪器 | 当前型号 | 当前型号 |
LM158AWGRQMLV 德州仪器 | 完全替代 | LM158AWGRLQMLV和LM158AWGRQMLV的区别 |
5962R8771003VXA 德州仪器 | 完全替代 | LM158AWGRLQMLV和5962R8771003VXA的区别 |
5962R8771002VXA 德州仪器 | 完全替代 | LM158AWGRLQMLV和5962R8771002VXA的区别 |