LPC4088FBD144,551

LPC4088FBD144,551图片1
LPC4088FBD144,551图片2
LPC4088FBD144,551图片3
LPC4088FBD144,551图片4
LPC4088FBD144,551图片5
LPC4088FBD144,551图片6
LPC4088FBD144,551图片7
LPC4088FBD144,551图片8
LPC4088FBD144,551图片9
LPC4088FBD144,551概述

NXP  LPC4088FBD144,551  微控制器, 32位, ARM 皮质-M4, 120 MHz, 512 KB, 96 KB, 144 引脚, LQFP

The is a 32-bit Microcontroller based on ARM Cortex-M4 operates at a maximum frequency of 120MHz. The ARM Cortex-M4 CPU incorporates a 3-stage pipeline, uses a Harvard architecture with separate local instruction and data buses as well as a third bus for peripherals and includes an internal prefetch unit that supports speculative branching. The ARM Cortex-M4 supports single-cycle digital signal processing and SIMD instructions. A hardware floating-point processor is integrated in the core for several versions of the part. The device incorporates 512kB internal flash, 96kB internal RAM, 4kB EEPROM, one USB Device/Host/OTG, 8-channel 12-bit A/D converter, 10-bit D/A converter, a comparator and 109 general-purpose I/O pins. This device also features peripherals like five UARTs, three inter-integrated circuit I2C, three serial peripheral interface SPI modules and one integrated interchip sound I2S.

.
ARM Cortex-M4 built-in MPU supporting eight regions
.
ARM Cortex-M4 built-in nested vectored interrupt controller NVIC
.
Non-maskable Interrupt NMI input
.
Hardware floating-point unit
.
JTAG and serial wire debug SWD, serial trace, eight breakpoints and four watch points
.
System tick timer
.
Multilayer AHB matrix interconnect
.
Split APB bus allows for higher throughput with fewer stalls between the CPU and DMA
.
Embedded trace macrocell ETM module supports real-time trace
.
Boundary scan for simplified board testing
.
LCD controller - Supporting both STN and TFT
.
External memory controller EMC
.
Eight channel general purpose DMA controller GPDMA
.
Quad SPI flash interface SPIFI
.
Ethernet MAC with MII/RMII interface and associated DMA controller
.
USB 2.0 full-speed dual port device/host/OTG controller
.
CAN controller with two channels
.
SD/MMC memory card interface
.
Four reduced power modes - Sleep, deep-sleep, power-down and deep power-down
.
The wake-up interrupt controller WIC
LPC4088FBD144,551中文资料参数规格
技术参数

频率 120 MHz

针脚数 144

时钟频率 120 MHz

RAM大小 96 KB

位数 32

耗散功率 1500 mW

模数转换数ADC 1

工作温度Max 85 ℃

工作温度Min -40 ℃

耗散功率Max 1500 mW

数模转换数DAC 1

电源电压 2.4V ~ 3.6V

电源电压Max 3.6 V

电源电压Min 2.4 V

封装参数

安装方式 Surface Mount

引脚数 144

封装 LQFP-144

外形尺寸

封装 LQFP-144

物理参数

工作温度 -40℃ ~ 85℃

其他

产品生命周期 Active

包装方式 Each

制造应用 HVAC, 成像, 成像, 视频和目视, 工业, 消费电子产品, 医用, 通信与网络, Communications & Networking, Automation & Process Control, 自动化与过程控制, 音频, 视频和目视, Industrial, Motor Drive & Control, 车用, 电机驱动与控制, Imaging, Video & Vision, Consumer Electronics, Audio, Automotive, Medical

符合标准

RoHS标准 RoHS Compliant

含铅标准 Lead Free

REACH SVHC标准 No SVHC

REACH SVHC版本 2015/12/17

数据手册

在线购买LPC4088FBD144,551
型号: LPC4088FBD144,551
制造商: NXP 恩智浦
描述:NXP  LPC4088FBD144,551  微控制器, 32位, ARM 皮质-M4, 120 MHz, 512 KB, 96 KB, 144 引脚, LQFP

锐单商城 - 一站式电子元器件采购平台