LTC6246CS6#PBF

LINEAR TECHNOLOGY  LTC6246CS6#PBF  运算放大器, 单路, 180 MHz, 1个放大器, 90 V/µs, 2.5V 至 5.25V, TSOT-23, 6 引脚

The is a 1mA power efficient single rail-to-rail I/O Operational Amplifier features an impressive 180MHz gain-bandwidth product, 90V/µs slew rate and a low 4.2nV/√Hz of input-referred noise. The combination of high bandwidth, high slew rate, low power consumption and low broadband noise makes these amplifiers unique among rail-to-rail input/output operational amplifiers with similar supply currents. They are ideal for lower supply voltage high speed signal conditioning systems. The LTC6246 maintains high efficiency performance from supply voltage levels of 2.5 to 5.25V and is fully specified at supplies of 2.7 and 5.0V. For applications that require power-down, the LTC6246 offer a shutdown pin which disables the amplifier and reduces current consumption to 42µA. The LTC6246 can be used as a plug-in replacement for many commercially available operational amplifiers to reduce power or to improve input/output range and performance.

.

120MHz Frequency -3dB, AV = 1

.

Low quiescent current 1mA maximum

.

High slew rate 90V/µs

.

Input common-mode range includes both rails

.

Output swings rail-to-rail

.

Low broadband voltage noise 4.2nV/√Hz

.

Power-down mode 42µA

.

Fast output recovery

.

0.5mV Maximum input offset voltage

.

100nA Input bias current

.

Large output current 50mA

.

110dB CMRR

.

45V/mV Open loop gain