LPC2132FBD64/01

LPC2132FBD64/01图片1
LPC2132FBD64/01图片2
LPC2132FBD64/01概述

NXP  LPC2132FBD64/01  微控制器, 32位, ARM7TDMI, 60 MHz, 64 KB, 16 KB, 64 引脚, LQFP

The is a 16-/32-bit Microcontroller based on ARM7TDMI-S CPU with real-time emulation and embedded trace support. A 128-bit wide memory interface and an unique accelerator architecture enable 32-bit code execution at maximum clock rate. For critical code size applications, the alternative 16-bit Thumb mode reduces code by more than 30 % with minimal performance penalty. The device incorporates 64kB embedded high speed flash, 16kB on-chip SRAM, 16-channel 10-bit A/D converter, 10-bit D/A converter, three 32-bit timers, PWM channels and 47 general-purpose I/O pins.

.
In-system programming/In-application programming ISP/IAP
.
EmbeddedICE RT and embedded trace interfaces
.
Two 32-bit Timers/external event counters, PWM unit and watchdog
.
Low power real-time clock with independent power and dedicated 32kHz clock input
.
Multiple serial interfaces including two UARTs 16C550, two Fast I2C-bus 400 Kbit/s, SPI and SSP
.
Vectored interrupt controller with configurable priorities and vector addresses
.
Up to forty-seven 5V tolerant general purpose I/O pins
.
Up to nine edge or level sensitive external interrupt pins available
.
60MHz Maximum CPU clock available from programmable on-chip PLL
.
On-chip integrated oscillator operates with external crystal in range of 1MHz to 30MHz
.
External oscillator up to 50MHz
.
Power saving modes include Idle and power-down
.
Individual enable/disable of peripheral functions as well as peripheral clock scaling down
.
Processor wake-up from Power-down mode via external interrupt or BOD
.
Single power supply chip with POR and BOD circuits
.
Fast GPIO ports enable port pin toggling up to 3.5 times faster than the original LPC213x
.
Dedicated result registers for ADCs reduce interrupt overhead
.
UART0/1 include fractional baud rate generator, auto-bauding capabilities & handshake flow-control
.
Additional BOD control enables further reduction of power consumption
LPC2132FBD64/01中文资料参数规格
技术参数

电源电压DC 3.00V min

针脚数 64

时钟频率 60.0 MHz

RAM大小 16 KB

位数 32

输入/输出数 47 Input

工作温度Max 85 ℃

工作温度Min -40 ℃

电源电压Max 3.6 V

电源电压Min 3 V

封装参数

安装方式 Surface Mount

引脚数 64

封装 LQFP

外形尺寸

封装 LQFP

其他

产品生命周期 Unknown

包装方式 Each

制造应用 视频和目视, Industrial, 医用, Medical, 成像, 视频和目视, 通信与网络, Automation & Process Control, 自动化与过程控制, Communications & Networking, 工业, Audio, Imaging, Video & Vision, 成像, 音频

符合标准

RoHS标准 RoHS Compliant

REACH SVHC标准 No SVHC

REACH SVHC版本 2015/12/17

数据手册

LPC2132FBD64/01引脚图与封装图
LPC2132FBD64/01引脚图
LPC2132FBD64/01封装图
LPC2132FBD64/01封装焊盘图
在线购买LPC2132FBD64/01
型号: LPC2132FBD64/01
制造商: NXP 恩智浦
描述:NXP  LPC2132FBD64/01  微控制器, 32位, ARM7TDMI, 60 MHz, 64 KB, 16 KB, 64 引脚, LQFP
替代型号LPC2132FBD64/01
型号/品牌 代替类型 替代型号对比

LPC2132FBD64/01

NXP 恩智浦

当前型号

当前型号

LPC2132FBD64/01,15

恩智浦

完全替代

LPC2132FBD64/01和LPC2132FBD64/01,15的区别

LPC2132FBD64

恩智浦

类似代替

LPC2132FBD64/01和LPC2132FBD64的区别

锐单商城 - 一站式电子元器件采购平台