LT6018IS8E#PBF

运算放大器, 1个放大器, 15 MHz, 30 V/µs, 8V至33V, SOIC, 8 引脚

The is a 36V, ultralow noise, precision operational amplifier op-amp with excellent noise performance in 8 pin S8E package. It is an outstanding choice for applications where 1/f noise impacts system performance with a 0.1Hz to 10Hz noise of only 30nVP-P. The input offset voltage remains low over the entire common mode input range. Open loop gain is typically 142dB enabling the part to achieve linearity better than 1ppm. The proprietary circuit topology of LT6018 provides excellent slew rate and settling time without compromising noise or DC precision. An enable pin allows the LT6018 to be put in a low power shutdown mode, reducing typical supply current to only 6.2µA. A reference pin for the enable pin is also provided which simplifies interface between external circuitry and LT6018. It is used in ADC driver, low noise precision signal processing, multiplexed applications, DAC buffer, precision data acquisition, active filters & professional audio.

.

Slew rate of 30V/µs and gain bandwidth product of 15MHz at f = 50KHz, V = ±15V

.

Wide supply voltage range from 8V to 33V

.

Input offset current of ±6nA at V= ±15V

.

Input bias current of ±900nA at V = ±15V, TA = -40°C to 85°C

.

CMRR of 133dB at VICM = -12V to 12V and PSRR of 140dB at VS = 8V to 33V, V = ±15V

.

Ultralow THD of -115dB at 1KHz and low power shutdown of 6.2µA

.

4.5KV HBM and 2KV CDM tolerance

.

Maximum offset voltage of 70µV and maximum offset voltage drift of 0.5µV/°C V= ±15V

.

Operating temperature range from -40°C to 85°C