混合信号微控制器 MIXED SIGNAL MICROCONTROLLER
description
The Texas Instruments MSP430 family of ultralow-power microcontrollers consist of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low power modes is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that attribute to maximum code efficiency. The digitally controlled oscillator DCO allows wake-up from low-power modes to active mode in less than 6µs.
• Low Supply Voltage Range 1.8 V to 3.6 V
• Ultralow-Power Consumption:
− Active Mode: 200 µA at 1 MHz, 2.2 V
− Standby Mode: 0.7 µA
− Off Mode RAM Retention: 0.1 µA
• Five Power Saving Modes
• Wake-Up From Standby Mode in less than 6 µs
• 16-Bit RISC Architecture, 125 ns Instruction Cycle Time
• Basic Clock Module Configurations:
− Various Internal Resistors
− Single External Resistor
− 32-kHz Crystal
− High Frequency Crystal
− Resonator
− External Clock Source
• 16-Bit Timer_A With Three Capture/Compare Registers
• 10-Bit, 200-ksps A/D Converter With Internal Reference, Sample-and-Hold, Autoscan, and Data Transfer Controller
• Serial Communication Interface USART0
With Software-Selectable Asynchronous
UART or Synchronous SPI MSP430x12x2 Only
• Serial Onboard Programming, No External Programming Voltage Needed Programmable Code Protection by Security Fuse
• Supply Voltage Brownout Protection
• MSP430x11x2 Family Members Include:
MSP430F1122: 4KB + 256B Flash Memory 256B RAM
MSP430F1132: 8KB + 256B Flash Memory 256B RAM
Available in 20-Pin Plastic SOWB, 20-Pin Plastic TSSOP and 32-Pin QFN Packages
• MSP430x12x2 Family Members Include:
MSP430F1222: 4KB + 256B Flash Memory 256B RAM
MSP430F1232: 8KB + 256B Flash Memory 256B RAM
Available in 28-Pin Plastic SOWB, 28-Pin Plastic TSSOP, and 32-Pin QFN Packages
• For Complete Module Descriptions, See the MSP430x1xx Family User’s Guide, Literature Number SLAU049
频率 8.00 MHz
电源电压DC 3.30 V, 3.60 V max
时钟频率 8.00 MHz
RAM大小 256 x 8
位数 16
FLASH内存容量 4 KB
I/O引脚数 22
内核架构 MSP430
UART数量 1
模数转换数ADC 1
FRAM内存容量 0 B
工作温度Max 85 ℃
工作温度Min 40 ℃
安装方式 Surface Mount
引脚数 32
封装 VQFN-32
长度 5 mm
宽度 5 mm
高度 0.9 mm
封装 VQFN-32
工作温度 -40℃ ~ 85℃
产品生命周期 Active
包装方式 Tape & Reel TR
RoHS标准 RoHS Compliant
含铅标准 Lead Free
型号/品牌 | 代替类型 | 替代型号对比 |
---|---|---|
MSP430F1222IRHBR TI 德州仪器 | 当前型号 | 当前型号 |
MSP430F1222IRHBT 德州仪器 | 类似代替 | MSP430F1222IRHBR和MSP430F1222IRHBT的区别 |