MAX4130EUK+T

MAXIM INTEGRATED PRODUCTS  MAX4130EUK+T  运算放大器, 轨至轨输出, 10 MHz, 1个放大器, 4 V/µs, ± 1.35V至± 3.25V, 2.7V至6.5V, SOT-23, 5 引脚

The is a single, wide bandwidth, low power, single supply rail to rail I/O operational amplifier op-amp in 5 pin SOT-23 package. This device operate either in a single supply +2.7V to +6.5V or dual supplies ±1.35V to ±3.25V with a common-mode voltage range that extends 250mV beyond VEE, VCC and capable of driving 250 ohm loads. This op-amp require only 900µA quiescent current per amplifier with its rail to rail input common-mode range and output swing, amplifier is ideal for low voltage, single supply operation. Although the minimum operating voltage is specified at 2.7V, the device typically operate down to 1.8V. In addition, low offset voltage and high speed make it ideal signal-conditioning stages for precision, low voltage and data acquisition systems.

.

Stable with 500pF capacitive loads

.

Operating temperature range from -40°C to 85°C

.

Unity gain stable

.

No phase reversal for overdriven inputs

.

Input offset voltage of 350µV

.

Power supply rejection ratio of 100dB at VCC = 2.7V to 6.5V

.

Slew rate of 4V/µs

.

10MHz gain bandwidth product