MAX3237EIPWR

TEXAS INSTRUMENTS  MAX3237EIPWR  线路驱动器, RS232, 5驱动器, 3V-5.5电源, TSSOP-28

The is a RS-232 multichannel Line Driver/Receiver consists of five line drivers, three line receivers and a dual charge-pump circuit with ±15kV ESD protection pin-to-pin serial-port connection pins, including GND. The device meets the requirements of A/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3 to 5.5V supply. This device operates at data signalling rates of 250kbps in normal operating mode MBAUD = GND and 1Mbps when MBAUD=VCC. The driver output slew rate is a maximum of 30V/µs. The MAX3237E transmitter is disabled and the outputs are forced into high-impedance state when the device is in shutdown mode SHDN=GND and the supply current falls to less than 1µA. Also, during shutdown, the onboard charge pump is disabled, V+ is lowered to VCC and V- is raised toward GND.

.

5 Line drivers, 3 line receivers and dual charge-pump circuit

.

Designed to be interchangeable with Maxim MAX3237E

.

Latch-up performance exceeds 100mA per JESD 78, class II

.

13V Supply voltage difference

.

±60mA Short-circuit output current

.

Green product and no Sb/Br