MAX9736AETJ+T

MAXIM INTEGRATED PRODUCTS  MAX9736AETJ+T  音频功率放大器, 高功率, D, 2通道, 27 W, 8V 至 28V, TQFN, 32 引脚

The is a mono/stereo high power class D amplifier in 32 pin TQFN package. It provides high performance, thermally efficient amplifier solutions. The MAX9736A outputs 2x15W in stereo mode and 30W in mono mode. It features a pin-selectable modulation schemes that select between filterless spread spectrum switching mode or a classic PWM fixed frequency switching mode. Filterless modulation allows the device to pass CE EMI limits with 1m cables using a low cost ferrite bead and capacitor on each output. Classic PWM modulation is optimized for best audio performance when using a full LC filter. A pin-selectable stereo/mono mode allows stereo operation into 8ohm loads or mono operation into 4ohm loads. In mono mode, the right input op-amp becomes available as a spare device allowing flexibility in system design. The gain is set externally set and operates in low power shutdown mode. Comprehensive click and pop circuitry minimizes noise into and out of shutdown or mute.

.

Supply voltage range is 8V to 28V

.

Operating temperature range from -40°C to 85°C

.

Quiescent supply current is 14mA and shutdown current is 1µA

.

High 67dB PSRR at 1KHz eliminating the need for a regulated power supply

.

Efficiency is 88% at 12V supply

.

Thermal and output current protection

.

Low power shutdown mode reduces supply current to less than 1µA

.

0.04% of THD+N

.

Input op-amps allow user to create summing amplifiers, lowpass/highpass filter & select optimal gain