M95128-WMN3TP/P

128 Kbit的串行SPI总线的EEPROM与高速时钟 128 Kbit serial SPI bus EEPROM with high speed clock

Summary description

These electrically erasable programmable memory EEPROM devices are accessed by a high speed SPI-compatible bus. The memory array is organized as 16384 x 8 bits. The device is accessed by a simple serial interface that is SPI-compatible. The bus signals are C, D and Q, as shown in Table 1 and Figure 1.

The device is selected when Chip Select S is taken Low. Communications with the device can be interrupted using Hold HOLD. In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. ECOPACK® packages are Lead-free and RoHS compliant.

Feature summary

■ Compatible with SPI Bus Serial Interface

  Positive Clock SPI Modes

■ Single Supply Voltage:

   – 4.5 to 5.5V for M95128

   – 2.5 to 5.5V for M95128-W

   – 1.8 to 5.5V for M95128-R

■ High Speed

   – 5MHz Clock Rate, 5ms Write Time

■ Status Register

■ Hardware Protection of the Status Register

■ BYTE and PAGE WRITE up to 64 Bytes

■ Self-Timed Programming Cycle

■ Adjustable Size Read-Only EEPROM Area

■ Enhanced ESD Protection

■ More than 100,000 Write Cycles

■ More than 40-Year Data Retention

■ Packages

   – ECOPACK® RoHS compliant