MAX16129UAEBD+

监控电路 Load-Dump/Reverse-Voltage Protection Circuits

Load Dump, Voltage Protection PMIC 8-uMAX

得捷:
IC LOAD DUMP REV V PROT 8UMAX

立创商城:
MAX16129UAEBD+

贸泽:
监控电路 Load-Dump/Reverse-Voltage Protection Circuits

安富利:
The MAX16128/MAX16129 load-dump/reverse-voltage protection circuits protect power supplies from damaging input-voltage conditions, including overvoltage, reverse-voltage, and high-voltage transient pulses. Using a built-in charge pump, the devices control two external back-to-back n-channel MOSFETs that turn off and isolate downstream power supplies during damaging input conditions, such as an automotive load-dump pulse or a reverse-battery condition. Operation is guaranteed down to 3V that ensures proper operation during automotive cold-crank conditions. These devices feature a flag output active-low FLAG that asserts during fault conditions.For reverse-voltage protection, external back-to-back MOSFETs outperform the traditional reverse-battery diode, minimizing the voltage drop and power dissipation during normal operation.The devices use fixed overvoltage and undervoltage thresholds, minimizing the external component count.The MAX16129 provides limiter-mode fault management for overvoltage and thermal-shutdown conditions; whereas the MAX16128 provides switch-mode fault management for overvoltage and thermal shutdown conditions. In the limiter mode, the output voltage is limited and active-low FLAG is asserted low during a fault. In the switch mode, the external MOSFETs are switched off and active-low FLAG is asserted low after a fault. The switch mode is available in four options—Latch mode, 1 Autoretry mode, 3 Autoretry mode, and Always autoretry mode.The MAX16128/MAX16129 are available in an 8-pin µMAX® package and operate over the automotive temperature range -40°C to +125°C.

DeviceMart:
IC LOAD DUMP REV V PROT 8UMAX