MAX8212EPA+

MAXIM INTEGRATED PRODUCTS  MAX8212EPA+  芯片, 微处理器监控器, 16.5V, DIP-8

The is a microprocessor voltage monitor with programmable voltage detection in 8 pin DIP package. This CMOS micropower voltage detector indicates microprocessors µPs power failures. It contains a comparator, a 1.5V band gap reference and an open-drain n-channel output driver. Two external resistors are used in conjunction with the internal reference to set the trip voltage to the desired level. A hysteresis output allows the user to apply positive feedback for noise-free output switching. The MAX8212 output turns on when a voltage greater than 1.5V at the threshold pin. It is not current limited and will typically sink 35mA. This device is a plug-in replacement for the bipolar ICL8211/ICL8212 in applications where the maximum supply voltage is less than 16.5V. It offers several performance advantages including reduced supply current, a tightly controlled band gap reference and more available current from the hysteresis output.

.

Supply voltage range is 2V to 16.5V

.

Operating temperature range from -40°C to 85°C

.

Supply current is 5µA

.

Threshold trip voltage range from 1.11V to 1.19V

.

Quiescent current is 5µA

.

±40mV threshold accuracy ±3.5%

.

On-board hysteresis output