MAX706ARESA+

MAXIM INTEGRATED PRODUCTS  MAX706ARESA+  芯片, 微处理器监控器, 5.5V, NSOIC-8

The is a +3V voltage monitoring low cost microprocessor µP supervisory circuit in 8 pin NSOIC package. This device reduces complexity and number of components required to monitor +3V power supply levels in +3V to +5V µP systems. It significantly improves system reliability and accuracy compared to separate ICs or discrete components. This device provides reset output during power-up, power-down and brown-out conditions. An independent watchdog output will goes low if watchdog input has not been toggled within 1.6s. The MAX706AR provides 1.25V threshold detector for power fail warning, low battery detection or for monitoring power supply other than main supply and active-low manual reset input. The watchdog timer function for MAX706AR disables when WDI input is left open or connected to a high impedance state of a low leakage tri-state output. It is used in computers, controllers, intelligent instruments, critical µP power monitoring and battery powered equipments.

.

Supply voltage range from 1.2V to 5.5V

.

Operating temperature range from -40°C to 85°C

.

Active-low, push-pull reset output signal

.

Reset threshold of 2.63V and reset time delay of 200ms

.

Debounced TTL/CMOS compatible manual reset input

.

Quiescent current of 100µA

.

Watchdog timeout period of 1.6s at VCC = 3V

.

Supply current of 90µA at VCC < 3.6V