MAX211IDBG4

TEXAS INSTRUMENTS  MAX211IDBG4  收发器, RS232, 4驱动器, 4.5V-5.5电源, SSOP-28

The is a RS-232 multichannel Line Driver/Receiver consists of four line drivers, five line receivers and a dual charge-pump circuit. It has ±15kV ESD protection pin-to-pin serial-port connection pins, including GND. The device meets the requirements of A/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signalling rate up to 120kbps and a maximum of 30V/µs driver output slew rate. The MAX211 has both shutdown SHDN and enable control EN. In shutdown mode, the charge pumps are turned off, V+ is pulled down to VCC, V- is pulled to GND and the transmitter outputs are disabled. This reduces supply current typically to 1µA.

.

Latch-up performance exceeds 100mA per JESD 78, class II

.

Green product and no Sb/Br