MAX8517EUB+T

MAXIM INTEGRATED PRODUCTS  MAX8517EUB+T  芯片, 稳压器, LDO, 固定

The is a 1.425V to 3.6V input, 1A, 0.2V dropout LDO regulator in 10 pin µMAX package. This LDO operate from input voltages as low as 1.425V and able to deliver up to 1A of continuous output current with a maximum dropout voltage of only 200mV. The output voltage can be set from 0.5V to VIN - 0.2V and is 1.4% accurate over load and line variations. It uses a small, 1µF ceramic input capacitors and 4.7µF ceramic output capacitors to deliver 1A output current. High bandwidth provides excellent transient response and limits the output voltage deviation to 45mV for a 20mA to 1A load step with only a 4.7µF ceramic output capacitor and voltage deviations can be reduced further by increasing output capacitor. It is used in servers, storage, networking, base stations, post regulators, notebooks, PDAs and ATE.

.

±1.4% output accuracy over load, line and temperature 0°C to +85°C, ±0.6% initial accuracy

.

Operating temperature range from -40°C to 85°C

.

Compatible with ceramic capacitors

.

Fast transient response

.

Operating supply current of 320µA

.

Shutdown supply current < 25µA

.

Short circuit protection

.

Thermal overload protection

.

Soft start limits inrush current