MAX5035BUSA+T

降压, 开关稳压器, 固定, 7.5V至76V输入, 5V/1A输出, 125kHz, NSOIC-8

The from Products is a 1A, 76V, high efficiency MAXPower step down DC to DC converter in 8 pin NSOIC package. The MAX5035 easy to use, high efficiency, high voltage, step down DC-DC converter operates from an input voltage up to 76V and consumes only 270µA quiescent current at no load. This pulse width modulated PWM converter operates at a fixed 125KHz switching frequency at heavy loads and automatically switches to pulse skipping mode to provide low quiescent current and high efficiency at light loads. The MAX5035 includes internal frequency compensation simplifying circuit implementation. The device uses an internal low on-resistance, high-voltage, DMOS transistor to obtain high efficiency and reduce overall system cost. The output current may be limited by the maximum power dissipation capability of the package. Typical application includes automotive, consumer electronics, industrial and distributed power.

.

Wide 7.5V to 76V input voltage range

.

Operating temperature range from 0°C to 85°C

.

1.9A peak switch current limit, efficiency up to 90%

.

5V fixed output voltage

.

Under voltage lockout, cycle by cycle current limit, hiccup mode output short circuit protection

.

Internal 0.4ohm high side DMOS FET, thermal shutdown

.

270µA quiescent current at no load, 10µA shutdown current

.

Internal frequency compensation

.

Fixed 125KHz switching frequency

.

Thermal shutdown and short circuit current limit