双6GT/s SAS/SATA转接驱动器, 3 V至3.6 V, TQFN-28
The is a dual 6GT/s SAS/SATA redriver with equalization and extended temperature operation in 28 pin TQFN package. This dual channel redriver is designed to redrive one full lane of SAS or SATA signals up to 6.0GT/s gigatransfers per second. It operates from single 3.3V supply. The MAX14986 has independent input equalization and output preemphasis. It enhances signal integrity at receiver by equalizing signal at input and establishing preemphasis at output of device. SAS and SATA OOB out of band signalling is supported using high speed amplitude detection on inputs and squelch on corresponding outputs. Inputs and outputs are all internally 50 ohm terminated and must be AC coupled to SAS/SATA controller IC and SAS/SATA device. The MAX14986 has -10dB differential input return loss, -6dB common mode input return loss, -10dB differential output return loss and -6dB common mode output return loss. it is used in computer on modules, carrier boards and test equipments.
- .
- Operating power supply range from 3V to 3.6V
- .
- Operating temperature range from -40°C to 85°C
- .
- Flow through pin-out, ruggedized and robust redriver with double performance
- .
- High performance solution designed to overcome lossy channels
- .
- 3dB of independent per channel selectable input EQ and output pre-emphasis
- .
- Compensates up to 30in of channel losses with 23psP-P deterministic Jitter & 1.5psRMS random jitter
- .
- 8dB of return loss up to 3GHz and standby supply current of 16mA
- .
- Designed to reliably operate in harsh environments, ease of design and layout
- .
- ±2.5KV human body model HBM ESD protection on all pins
- .
- Operating supply current of 140mA EQ_ = PE_ = GND and 175mA EQ_ = PE_ = VCC
