MAX483EPA+

MAX483EPA+图片1
MAX483EPA+图片2
MAX483EPA+图片3
MAX483EPA+图片4
MAX483EPA+图片5
MAX483EPA+图片6
MAX483EPA+图片7
MAX483EPA+图片8
MAX483EPA+图片9
MAX483EPA+概述

RS-485 Single Transmitters/Receivers, 5V, MAX4xx Series, Maxim Integrated### RS-485 线路驱动器和接收器

RS-485 Single Transmitters/Receivers, 5V, MAX4xx Series,

### RS-485 线路驱动器和接收器


欧时:
### RS-485 Single Transmitters/Receivers, 5V, MAX4xx Series, Maxim Integrated### RS-485 线路驱动器和接收器


得捷:
IC TRANSCEIVER HALF 1/1 8DIP


立创商城:
MAX483EPA+


贸泽:
RS-422/RS-485 接口 IC RS-485/RS-422 Transceiver


安富利:
The MAX481, MAX483, MAX485, MAX487-MAX491, and MAX1487 are low-power transceivers for RS-485 and RS-422 communication. Each part contains one driver and one receiver. The MAX483, MAX487, MAX488, and MAX489 feature reduced slew-rate drivers that minimize EMI and reduce reflections caused by improperly terminated cables, thus allowing error-free data transmission up to 250kbps. The driver slew rates of the MAX481, MAX485, MAX490, MAX491, and MAX1487 are not limited, allowing them to transmit up to 2.5Mbps.These transceivers draw between 120µA and 500µA of supply current when unloaded or fully loaded with disabled drivers. Additionally, the MAX481, MAX483, and MAX487 have a low-current shutdown mode in which they consume only 0.1µA. All parts operate from a single 5V supply.Drivers are short-circuit current limited and are protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs into a high-impedance state. The receiver input has a fail-safe feature that guarantees a logic-high output if the input is open circuit.The MAX487 and MAX1487 feature quarter-unit-load receiver input impedance, allowing up to 128 MAX487/MAX1487 transceivers on the bus. Full-duplex communications are obtained using the MAX488–MAX491, while the MAX481, MAX483, MAX485, MAX487, and MAX1487 are designed for half-duplex applications.


Chip1Stop:
Single Transmitter/Receiver RS-422/RS-485 8-Pin PDIP N


TME:
Interface; transceiver; RS422,RS485,half duplex; 250kbps; DIP8


Newark:
# MAXIM INTEGRATED PRODUCTS  MAX483EPA+  TRANSCEIVER RS485/RS422, DIP8, 483


DeviceMart:
IC TXRX RS485/RS422 8-DIP


Win Source:
1/1 Transceiver Half RS422, RS485 8-PDIP


MAX483EPA+中文资料参数规格
技术参数

电源电压DC 4.75V min

供电电流 0.35 mA

通道数 1

针脚数 8

耗散功率 727 mW

数据速率 250 kbps

工作温度Max 85 ℃

工作温度Min -40 ℃

耗散功率Max 727 mW

电源电压 4.75V ~ 5.25V

电源电压Max 5.25 V

电源电压Min 4.75 V

输入电压 5 V

封装参数

安装方式 Through Hole

引脚数 8

封装 DIP-8

外形尺寸

长度 9.91 mm

宽度 7.87 mm

高度 4.572 mm

封装 DIP-8

物理参数

工作温度 -40℃ ~ 85℃

其他

产品生命周期 Unknown

包装方式 Each

符合标准

RoHS标准 RoHS Compliant

含铅标准 Lead Free

数据手册

MAX483EPA+引脚图与封装图
MAX483EPA+引脚图
MAX483EPA+封装图
MAX483EPA+封装焊盘图
在线购买MAX483EPA+
型号: MAX483EPA+
描述:RS-485 Single Transmitters/Receivers, 5V, MAX4xx Series, Maxim Integrated ### RS-485 线路驱动器和接收器
替代型号MAX483EPA+
型号/品牌 代替类型 替代型号对比

MAX483EPA+

Maxim Integrated 美信

当前型号

当前型号

MAX483CPA+

美信

功能相似

MAX483EPA+和MAX483CPA+的区别

MAX483EPA

美信

功能相似

MAX483EPA+和MAX483EPA的区别

锐单商城 - 一站式电子元器件采购平台